TCT Hole Saw 90 mm for Metal with Carbide Teeth and Titanium Pilot Drill Cutting Depth 20 mm Stainless Steel and Wood
You already have the maximum available quantity in your cart.
The TCT hole saw cuts a precise circular hole with a diameter of 90 mm in metal in one go. The teeth of the saw have brazed tips made of tungsten carbide, which cut through stainless steel, iron, and other metal materials. In the centre is a titanium-coated pilot drill, which initially captures the marked centre and then guides the saw straight throughout the drilling process. Therefore, you do not need to gradually enlarge the large hole with several tools. The saw also handles wood.
A hole with a diameter of 90 mm is useful for passing wide pipes and ventilation through sheet metal, during the installation of large grommets, or when modifying metal covers, distribution boards, and technical panels. The perimeter alternates left, centre, and right teeth, allowing the chips to break off in smaller pieces and the cut to proceed with less vibration. With a cutting depth of 20 mm, it can handle sheets, strips, and the walls of steel profiles.
Before drilling, mark the centre of the hole and tap it with a centre punch so that the pilot drill does not slip on smooth material. Secure the workpiece firmly in a vice or with clamps to the workbench. Hold the saw perpendicular to the surface and start with slow speeds until the teeth evenly cut around the entire perimeter. Then apply a slight and steady pressure. Support thin sheet metal with a board to prevent it from bending around the hole.
- Type – TCT hole saw (hole cutter) with pilot drill
- Hole diameter – 90 mm
- Blade material – carbide (tungsten carbide)
- Pilot drill – with titanium coating and spring for ejecting cut material
- Cutting depth – 20 mm
- Shank – 10 mm
- Length – 80 mm
- Tooth geometry – alternating left, centre, and right teeth
- Application – stainless steel, iron, and other metals as well as wood
- Package contents – 1 TCT hole saw with a diameter of 90 mm with an attached pilot drill and spring
With a 90 mm hole saw, the teeth on the perimeter move at high speed, so when drilling into steel and stainless steel, set the drill to low speeds and cool the cutting area with cutting oil. Allow the tool to cool after each hole. After finishing work, clean the saw of metal shavings and store it in a dry place. The pilot drill is held in the body of the saw by a screw, so you can replace it after wear.
The TCT hole saw 90 mm is suitable for craftsmen and DIY enthusiasts who need large, clean, and precise holes in sheet metal and steel parts. The teeth with carbide tips also cut through stainless steel, and the spring on the pilot drill ejects the cut disc from the saw after the hole is finished. The saw is clamped onto a 10 mm shank into both handheld and stand drills. The total length of the tool is 80 mm. It finds use in plumbing, electrical, and locksmith work.
Delivery
Delivery to address€1.99
Estimated delivery: 23 November – 4 December
Shipped from China
You only pay for delivery once per order, whatever its size.
We will email you the tracking number as soon as the seller makes it available.
Delivery is only possible to addresses in Ireland.
Customs and import VAT: if the goods in a parcel are worth up to €150, customs duty and import VAT are already included in the price. If the value is over €150, the carrier will charge you import VAT on delivery and, where applicable, customs duty and a customs clearance fee. Send us the receipt – we will reimburse you the full amount. You can find more information in our Terms and Conditions.
Need more information? Read our article Delivery and Payment.
Returns and Exchanges
Shop with confidence – LUNZO guarantees that your purchase goes smoothly. You arrange returns and exchanges directly with us, so there is nothing to sort out with the seller.
Returns30 days to return without giving a reason
Withdrawal period30 days from receipt of the goods
Deadline to send the goods backWithin 14 days of withdrawing from the contract
Return shipping costsYou pay the postage for sending the goods back to Spain. With An Post (Standard Post), returning a parcel of up to 2 kg to Spain costs about €30. We charge no other fee.
RefundWithin 14 days of your notice of withdrawal, using the same payment method you used for the purchase. If you return the whole order, we will also refund the delivery cost.
Crediting of the amountUsually 2–10 working days, depending on the payment method
Product conditionYou may unpack the goods and try them as you would in a shop, and you can return them even without the original packaging
Returns addressQX-BOX AEMALL RETURN
Rotonda Rene Descartes, Parcela 101 – Nave 3
28070 Alcala de Henares, Madrid
SpainReturns centre in Spain operated by Qxbox, an e-commerce logistics provider and logistics partner of the sellers on our platform.
How do I return goods?
- Email us at info@lunzo.ie with your order number and the items you are returning.
- Pack the goods and send them by post to the returns address in Spain.
- Send us the proof of dispatch with the tracking number – this lets us refund you without waiting for the parcel to arrive.
Faulty goodsUp to 6 years to claim for faulty goods
Did the goods arrive damaged, do they not work, is something missing from the parcel or do they not match the description? We will sort it out.
Period for claiming a faultUp to six years from delivery of the goods
RefundWithout undue delay once the claim has been settled, using the same payment method you used for the purchase
How does it work?
- Email us at info@lunzo.ie with your order number and a description of the problem, and attach photographs or a video.
- We will assess it and suggest a solution. Photographs are usually enough – please do not send the goods back until you have received instructions from us.
- We will settle your claim within 30 days at the latest – with a new item, a price reduction or a refund.
If the goods need to be sent back, we will refund the postage for a valid claim (just provide the receipt).
ExchangesA different size, colour or variant
Write to us within 30 days of receipt at info@lunzo.ie with your order number and the variant you are interested in. We usually reply within 24 hours.
If the variant is available, we will send you instructions for the exchange. You pay the cost of sending the original item back; the new variant will be sent to you at no further charge.
Need more information? Read our articles Returns and Exchanges and Faulty Goods.
Payment methods
Credit / debit card
Pay with your Visa or Mastercard through a secure payment gateway. Payment goes through instantly, so we can process your order straight away.
Apple Pay
Pay with a card saved in Apple Wallet on your iPhone, iPad or Mac. You confirm the payment with Face ID, Touch ID or your passcode.
Google Pay
Pay with a card saved in your Google account, on an Android phone or in the Chrome browser. You never have to enter your card number.
Bank transfer
Once you complete your order, we will send you the details for the bank transfer. Your order will be dispatched as soon as the payment reaches our account.
Revolut Pay
Pay with your Revolut account – simply confirm the payment in the Revolut app, without entering any card details. Payment goes through instantly.
Payment is made through a secure payment gateway and your card details are never stored anywhere on our side. We do not charge a fee for any payment method.
Need more information? Read our article Delivery and Payment.
About the seller
This product is sold and shipped by an external seller. LUNZO guarantees you a safe purchase: online payments go through a secure payment gateway, and you handle your order, returns and complaints with us.
The following information has been provided by the product seller, who is responsible for its accuracy. The seller acts as a trader.
Seller:
Yongkang Yongchang Electric Tools Co., Ltd
Address: West side, 3rd Floor, No 27, Zerong Road, Dahou Village, Tangxian Town, Jinhua City, Zhejiang, China
E-mail: 297288217@qq.com
Telephone: +86 135 6007 1153
Manufacturer:
Yongkang Yongchang Electric Tools Co., Ltd
Address: West side, 3rd Floor, No 27, Zerong Road, Dahou Village, Tangxian Town, Jinhua City, Zhejiang, China
E-mail: 297288217@qq.com
Telephone: +86 135 6007 1153
EU responsible person:
EU Consulten Srls
Address: Via Varesina 55, 20156 Milano, Italy
E-mail: Eu-consultenSrls@hotmail.com
Telephone: +39 328 583 2654
All products from this seller