Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 1
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 1
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 2
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 3
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 4
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 5
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 6
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood 7

TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood

Hole saw with carbide teeth for large holes of 55 mm in sheet metal, iron and stainless steel. It can be clamped onto a 10 mm shank for use with standard hand-held or pillar drills. Full description
In stock
€30.96
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TCT Hole Saw 55 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm for Stainless Steel, Iron and Wood

The TCT hole saw is a tool for drilling large circular holes with a diameter of 55 mm into metal. The crown teeth carry tungsten carbide tips that cut through stainless steel, iron, and other metal materials. In the centre, there is a guide drill with a titanium coating that holds the crown precisely in place at the marked spot at the start of drilling and continues to guide it along the axis. The hole is created all at once without the need for gradual drilling. The tool is also capable of drilling into wood.

A hole with a diameter of 55 mm is useful where it is necessary to pass a thicker pipe, hose, or bundle of cables through a sheet metal wall, install a larger grommet, or modify a metal cover, cabinet, or panel. The cutting teeth have an alternating geometry, so the left, centre, and right edges repeat around the circumference. This divides the chips into smaller pieces, resulting in less vibration during drilling. The useful depth of cut of 20 mm is sufficient for sheets, strips, and walls of steel profiles.

Mark the centre of the hole in advance and tap it with a centre punch so that the guide drill can easily catch and does not slip. Secure the workpiece firmly in a vice or clamp it down. Position the hole saw perpendicular to the surface and begin drilling slowly until the teeth evenly cut around the entire circumference. Then you can gradually increase the pressure. Support thin sheet metal with a solid board to prevent it from bending around the hole and to keep the edge clean.

  • Type – TCT hole saw (hole cutter) with guide drill
  • Hole diameter – 55 mm
  • Blade material – carbide (tungsten carbide)
  • Guide drill – with titanium coating and spring for ejecting the cut material
  • Depth of cut – 20 mm
  • Shank – 10 mm
  • Length – 80 mm
  • Tooth geometry – alternating left, centre, and right edges
  • Usage – stainless steel, iron, and other metals as well as wood
  • Package contents – 1 TCT hole saw with a diameter of 55 mm with an attached guide drill and spring

When working with such a large diameter, use low speeds and a consistent feed rate, ideally with cutting oil or other cooling methods when drilling steel and stainless steel. Allow the tool to cool between individual holes. After use, clean the hole saw of chips and store it in a dry place. The guide drill is secured in the body of the crown with a screw and can be replaced after wear.

The TCT hole saw 55 mm is a suitable addition to any workshop for those who work with metal and require large and precise circular holes. The combination of carbide tips and a guide drill with a spring allows for clean drilling even into stainless steel and easy removal of the cut disc. It is clamped onto a 10 mm shank for use with standard hand-held or pillar drills. The total length of the tool is 80 mm. It will be useful for locksmiths, plumbers, electricians, and DIY enthusiasts.

Price incl. VAT €30.96