Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 1
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 1
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 2
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 3
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 4
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 5
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 6
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood 7

TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood

Hole saw for circular holes 45 mm in iron, steel and stainless steel. The titanium-coated guide drill bit maintains precise centring and carbide teeth cut without burrs. Full description
In stock
€21.35
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TCT Hole Saw 45 mm for Metal and Stainless Steel with Carbide Teeth and Titanium Guide Drill Bit Cutting Depth 20 mm Steel and Wood

The TCT hole saw is designed for cutting holes with a diameter of 45 mm in metallic materials. The cutting teeth are fitted with carbide tips that reliably work in stainless steel, iron, and common structural steel. At the centre of the saw is a titanium-coated guide drill bit that determines the location of the hole and prevents the tool from wandering. The hole is cut all at once around the entire circumference, so there is no need for sequential drilling. The hole saw can also be used in wood.

A hole with a diameter of 45 mm is useful for routing pipes and cable bundles through metal walls, for installing grommets, or for mounting fittings and accessories into metal cabinets and doors. The cutting edges are arranged alternately left, centre, and right. This arrangement divides the chip into smaller pieces, reduces tool vibration, and results in a smoother cut. The useful cutting depth of 20 mm is sufficient for sheets, profiles, and thicker strips.

First, mark the centre of the future hole and punch it with a centre punch so that the guide drill bit can grip well. Secure the workpiece in a vice or clamp it to the workbench. Position the hole saw perpendicular to the material and start drilling at slow speeds until all the teeth are evenly engaged. Only then increase the pressure, always smoothly and without jerking. Place a sturdy backing under thin sheets to prevent the material from bending during drilling.

  • Type – TCT hole saw (circular saw) with guide drill bit
  • Diameter of hole – 45 mm
  • Material of cutting edges – carbide (tungsten carbide)
  • Guide drill bit – with titanium coating and spring for ejecting the cut material
  • Cutting depth – 20 mm
  • Shank – 10 mm
  • Length – 80 mm
  • Tooth geometry – alternating left, centre, and right edges
  • Usage – stainless steel, iron, and other metals as well as wood
  • Contents of package – 1 TCT hole saw with a diameter of 45 mm with an attached guide drill bit and spring

When drilling into steel, especially stainless steel, choose lower speeds, consistent feed, and coolant with cutting oil. This way, the edges will maintain their sharpness longer and the hole will have a clean edge. After finishing work, clean the hole saw of chips and store it in a dry place. The guide drill bit is secured in the body of the saw with a screw, making it easy to replace when worn.

The TCT 45 mm hole saw is a suitable tool for workshops, installations, and repairs where precise circular holes need to be cut into metal. The tungsten carbide teeth handle stainless steel, and the spring on the guide drill bit ejects the cut disc from the saw after drilling. The tool is clamped by the 10 mm shank into the chuck of both hand drills and pillar drills. The total length of the hole saw is 80 mm. It will be appreciated by locksmiths, plumbers, electricians, and DIY enthusiasts working with sheets and steel profiles.

Price incl. VAT €21.35