Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 1
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 1
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 2
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 3
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 4
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 5
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 6
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood 7

TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood

Hole saw with carbide teeth for clean 16 mm holes in sheet metal, stainless steel and iron. The spring on the guide drill ejects the cut disc from the saw after cutting. Full description
In stock
€13.06
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TCT Hole Saw 16 mm for Metal Tungsten Carbide Teeth and Titanium Guide Drill with Spring Cutting Depth 20 mm for Stainless Steel, Iron and Wood

The TCT hole saw is designed for drilling circular holes with a diameter of 16 mm in sheet metal, profiles and other metal parts. The teeth of the saw are fitted with tungsten carbide edges, enabling it to handle stainless steel and iron. In the centre, there is a guide drill with a titanium coating that holds the saw in place during use, preventing it from slipping. The hole is created in one pass, without the need for progressively drilling with several bits. In addition to metal, the saw can also be used for wood.

The 16 mm diameter is popular for electrical installations, as it corresponds to holes for smaller cable glands and conduits in distribution boards and metal boxes. It is also useful for modifying metal furniture, shelves or brackets. The edges are arranged alternately left, centre and right, so each tooth removes only a portion of the chip, resulting in a smoother cut. Cutting depth 20 mm is ample for sheets and thick-walled profiles.

Before you begin, centre punch the hole location with a dot punch, so the tip of the guide drill has a place to grip. Hold the saw perpendicular to the surface and start the cut at slow speeds until the teeth engage all around. Only then should you apply a slight and even pressure. Secure the workpiece in a vice or clamp, and support thin sheet metal with wood to prevent it from bending and to ensure the bottom edge of the hole remains burr-free.

  • Type – TCT hole saw (punch) with guide drill
  • Hole diameter – 16 mm
  • Blade material – tungsten carbide
  • Guide drill – with titanium coating and spring for ejecting the cut material
  • Cutting depth – 20 mm
  • Shank – 10 mm
  • Length – 80 mm
  • Tooth geometry – alternating left, centre and right edges
  • Usage – stainless steel, iron and other metals as well as wood
  • Package contents – 1 TCT hole saw with a diameter of 16 mm with an attached guide drill and spring

When drilling steel and stainless steel, use lower speeds and cooling, such as cutting oil, to prevent the edges from overheating unnecessarily and to allow chips to exit the cut more easily. After finishing the job, remove chips from the saw and store it in a dry place. The guide drill is secured in the saw with a screw and can be replaced in case of wear.

The TCT 16 mm hole saw makes it easier for anyone who needs to create a clean and precise circular hole in metal. The tungsten carbide teeth and guide drill with spring ensure accurate drilling and easy removal of the cut disc. It is suitable for holes for cable glands, conduits, pipes and fasteners. It is clamped into the drill chuck by 10 mm shank. The overall length of the tool is 80 mm.

Price incl. VAT €13.06