Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 1
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 1
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 2
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 3
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 4
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 5
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 6
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron 7

TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron

Carbide hole saw for clean holes 13 mm in stainless steel, iron, and wood. The spring on the guide drill helps to easily eject the cut disc. Full description
In stock
€11.75
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TCT Hole Saw 13 mm for Metal with Carbide Teeth and Titanium Guide Drill Depth of Cut 20 mm Shank 10 mm For Stainless Steel and Iron

The TCT hole saw with a diameter of 13 mm is used for cutting circular holes in stainless steel, iron, and other metals. Its cutting edges are made of carbide, specifically tungsten carbide, which is harder than standard high-speed steel. Accurate positioning of the hole is ensured by the titanium-coated guide drill located in the centre of the saw. A spring is fitted on the drill, which helps to eject the cut disc from the saw after the hole is completed. In addition to metal, it is also suitable for working with wood.

The cutting edges are arranged alternately around the perimeter as left, centre, and right, so each tooth only removes a portion of the material, allowing for better chip removal. The saw has a depth of cut of 20 mm, which corresponds to standard thicknesses of sheets and metal profiles. The 13 mm size is appreciated when installing electrical systems, distribution boards, or brackets, where it is necessary to make several identical holes in succession, each with a smooth and circular edge without tearing the material.

For best results, mark the location of the hole beforehand and lightly tap it with a centre punch. The guide drill will then find the centre without wandering, and the saw will cut into the material evenly around the entire circumference. Hold the drill vertically and do not apply too much pressure; let the teeth work at their own pace. It is advisable to clamp the workpiece in a vice or secure it with a clamp to prevent it from rotating during drilling.

  • Type – TCT hole saw (hole cutter) with guide drill
  • Hole Diameter – 13 mm
  • Blade Material – carbide (tungsten carbide)
  • Guide Drill – with titanium coating and spring for ejecting cut material
  • Depth of Cut – 20 mm
  • Shank – 10 mm
  • Length – 80 mm
  • Tooth Geometry – alternating left, centre, and right cutting edges
  • Usage – stainless steel, iron, and other metals as well as wood
  • Package Contents – 1 TCT hole saw with a diameter of 13 mm with the guide drill and spring fitted

For stainless steel, we recommend using lower speeds, not applying too much pressure on the saw, and continuously cooling the cut with cutting oil or emulsion during drilling. After completing the work, remove chips from the saw and store it in a dry environment. The guide drill is held in the body of the saw by an adjustment screw, allowing it to be removed and replaced if necessary.

The TCT hole saw 13 mm is suitable for both professionals and DIY enthusiasts who drill holes in metal and want a clean and precise result. The carbide teeth and titanium-coated guide drill ensure stable and accurate drilling. It is particularly useful for holes for cable outlets, small pipes, rivets, and screws. It is clamped into the drill by the 10 mm shank. The overall length of the tool is 80 mm.

Price incl. VAT €11.75