Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Garage Equipment Garage Accessories Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 1
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 1
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 2
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 3
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 4
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 5
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green 6

Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green

The green cast iron vice can be attached to a table top with a screw clamp without drilling. The 50 mm jaws with an opening of up to 72 mm hold the workpiece securely for precise work. Full description
In stock
€89.91
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Table Vice Multifunctional With Clamping to Table up to 40 mm Jaw Width 50 mm Opening 72 mm Cast Iron Body Metal Guide Rods Green

The multifunctional table vice with a cast iron body is designed for precise work in the workshop, on the workbench, or on the bench where a workpiece needs to be securely held. It attaches to the edge of the table using a screw clamp, allowing you to use it without drilling and to remove it after completing your work. The movable jaw is adjusted by turning the threaded spindle using a cross lever, and it is guided by two metal guide rods during movement. This ensures that the clamped workpiece remains in place while you have both hands free to work with tools. The cast iron body of the vice and the frame of the clamping clamp are coated in green paint.

  • Cast Iron Construction — The body of the vice with both jaws and the frame of the clamping clamp are made from cast iron with a green coating. The guide rods, threaded spindle, lever, and clamp screw are metal with a shiny finish.
  • Jaw Width — The jaws have a width of 50 mm and are designed for clamping smaller workpieces and parts. The fixed jaw is part of the cast iron body of the vice.
  • Jaw Opening — The movable jaw can be separated from the fixed jaw by up to 72 mm. This dimension determines the maximum width of the workpiece that can be clamped in the vice.
  • Flat Top Surface — The top side of the jaws is flat and forms an area of dimensions 95 x 50 mm when clamped. Most of this area is occupied by the top side of the fixed jaw.
  • Table Clamping — The clamp attaches to the edge of the table or bench and accommodates a board thickness of up to 40 mm. Attachment does not require drilling holes or screwing into the work surface.
  • Clamp Screw with Handle — The clamp screw presses the board from below and has a transverse handle at the bottom end. This allows you to tighten or loosen the clamp by hand without additional tools.
  • Jaw Control — By turning the cross lever, the movable jaw approaches or moves away from the fixed jaw. You can gradually adjust the pressure on the workpiece as needed.
  • Jaw Guidance — Two metal guide rods located above and below the spindle guide the movable jaw during movement.
  • Portability — After loosening the clamp, you can remove the vice from the table and transfer it to another table or store it when not in use.
  • Dimensions — The overall dimensions of the vice are 135 x 150 mm (length x height with jaws clamped). The height includes the clamping clamp with the screw handle.
  • Package Contents — 1 x table vice.

The vice is suitable for work tables and benches with a board up to 40 mm thick, to which it can be attached without drilling. The jaws with a width of 50 mm and an opening of up to 72 mm can accommodate smaller workpieces that you need to clamp while sawing, grinding, drilling, or gluing. The cast iron body with a green coating is complemented by metal guide rods and a threaded spindle operated by a cross lever. You can manage both the clamping of the workpiece and the attachment to the table by hand using two transverse handles. It is a multifunctional tool for precise work in the home workshop as well as at the workplace.

Price incl. VAT €89.91