Home page Home page Auto & Moto Car Interior Accessories Car safety equipment Synthetic Winch Rope 6 mm x 15 m UHMWPE Strength 7700 lbs Metal Eyelet and Protective Sleeve for ATVs and UTVs
Synthetic Winch Rope 6 mm x 15 m UHMWPE Strength 7700 lbs Metal Eyelet and Protective Sleeve for ATVs and UTVs

Synthetic Winch Rope 6 mm x 15 m UHMWPE Strength 7700 lbs Metal Eyelet and Protective Sleeve for ATVs and UTVs

Replacement winch rope made of UHMWPE fibres with a diameter of 6 mm and a length of 15 m. Metal eyelet and abrasion-resistant sleeve. Suitable for recovering ATVs and UTVs. Full description
In stock
Colour:
€32.71
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Synthetic Winch Rope 6 mm x 15 m UHMWPE Strength 7700 lbs Metal Eyelet and Protective Sleeve for ATVs and UTVs

The synthetic winch rope is designed as a replacement or new equipment for the winch on an ATV, off-road buggy, or other utility vehicle. The rope is braided from UHMWPE fibres, which is ultra-high molecular weight polyethylene, commonly used for synthetic winch ropes. The diameter of the rope is 6 mm and its length is 15 metres, providing sufficient reserve for recovery from mud, snow, or sand. The manufacturer states a strength of 7700 lbs, approximately 3490 kg. The rope is supplied ready to be wound onto the winch drum, and its ends are finished.

At one end, the rope is braided around a metal eyelet in the shape of a drop, into which a hook, shackle, or soft loop is attached. The eyelet maintains the loop shape of the rope and protects the fibres at the point where metal parts exert pressure. Just behind the eyelet, a protective sleeve made of sturdy fabric is threaded onto the rope, which protects it from abrasion against edges, rocks, or the vehicle's bumper. The other end of the rope is secured with a heat-shrink tubing, preventing it from unraveling and allowing for easy attachment to the winch drum.

  • Type – synthetic winch rope
  • Material – UHMWPE
  • Diameter – 6 mm
  • Length – 15 m
  • Strength – 7700 lbs (approximately 3490 kg)
  • Termination – metal eyelet at one end and heat-shrink tubing at the other
  • Protection – textile sleeve at the eyelet
  • Use – winches for ATVs and UTVs, recovery and towing
  • Contents – 1 synthetic rope 6 mm x 15 m with a metal eyelet and protective sleeve (without hook)

Before first installation, unwind the original rope from the winch drum and attach the new rope according to the winch manufacturer's instructions. Wind the rope evenly and under slight tension to prevent the individual layers from cutting into each other on the drum. After driving in mud or sand, rinse the rope with water and allow it to dry freely. Regularly check for frayed fibres and always reposition the protective sleeve to the area where the rope contacts sharp edges. Maintain a safe distance from the taut rope during recovery and do not exceed the stated strength.

The synthetic rope, measuring 15 m in length and 6 mm in diameter, is a practical accessory for anyone venturing off-road with an ATV and wanting to have a winch ready for recovery. The braided UHMWPE fibre with a strength of 7700 lbs is complemented by a metal eyelet for hook attachment and a protective sleeve against abrasion. The finished terminations at both ends facilitate the replacement of the old rope as well as installation on a new winch. The rope is suitable for ATVs, UTVs, and other lightweight utility vehicles equipped with a winch. Before each use, simply perform a quick check of the rope, and it is ready for work.

Price incl. VAT €32.71