Home page Home page Photo, Audio-Video & TV Hi-Fi Amplifiers Stereo Amplifier XH-A157 PAM8403 2 x 3 W Volume Control with Switch AUX Input 3.5 mm Power Supply 5 V Module 37 x 21 mm for Speakers
Stereo Amplifier XH-A157 PAM8403 2 x 3 W Volume Control with Switch AUX Input 3.5 mm Power Supply 5 V Module 37 x 21 mm for Speakers

Stereo Amplifier XH-A157 PAM8403 2 x 3 W Volume Control with Switch AUX Input 3.5 mm Power Supply 5 V Module 37 x 21 mm for Speakers

Dual-channel PAM8403 amplifier with a power output of 2 x 3 W and AUX 3.5 mm input. Volume control with switch and 5 V power supply for home speakers. Full description
In stock
€10.00
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Stereo Amplifier XH-A157 PAM8403 2 x 3 W Volume Control with Switch AUX Input 3.5 mm Power Supply 5 V Module 37 x 21 mm for Speakers

The XH-A157 stereo amplifier with PAM8403 chip is a small dual-channel module that drives a pair of smaller speakers from a phone, computer, MP3 player, or other source with a headphone output. The sound is connected via a standard cable to the AUX jack 3.5 mm input, eliminating the need for soldering signal wires. The output power is 2 x 3 W and the module is designed for speakers with an impedance of 4 to 8 Ω. The volume is adjusted using a rotary knob, which also serves as a switch. The board is suitable for DIY enthusiasts, revitalising older speakers, and educational projects.

Power is supplied by a direct current voltage of 5 V, which connects via a red two-pin connector; it can be powered, for example, from a 5 V USB charger using an appropriate cable. Speakers connect to two white connectors for the left and right channels, using the included cables with connectors on one end and stripped wires on the other. Turning the knob to the right turns the amplifier on and increases the volume, while turning it to the left decreases the volume until it is turned off. The potentiometer 50 kΩ has a threaded shaft, allowing it to be secured to the front panel of the enclosure using the included nut and washer.

  • Model – XH-A157
  • Amplifier Chip – PAM8403
  • Number of Channels – 2 (stereo)
  • Output Power – 2 x 3 W
  • Speaker Impedance – 4 to 8 Ω
  • Power Supply Voltage – 5 V DC
  • Audio Input – AUX jack 3.5 mm
  • Control – rotary potentiometer 50 kΩ with switch
  • Connections – connectors for power and both speakers
  • Dimensions – 37 x 21 x 13 mm
  • Operating Temperature – -20 to 85 °C
  • Operating Humidity – 5 to 95 % RH
  • Package Contents – 1 XH-A157 amplifier board with potentiometer, 1 knob, 1 washer, 1 nut, and 3 connecting cables with connectors

Before connecting the power supply, check the polarity according to the markings on the board and do not exceed the voltage of 5 V. Protect the module from moisture and conductive objects that could cause a short circuit on the underside of the board. For permanent installation, it is advisable to place the board in a plastic enclosure, where the knob with the nut holds it in place. Route the cables so that they are not taut and the connectors do not pull out during handling.

The XH-A157 amplifier is a practical solution for anyone looking to quickly revive passive speakers without complicated wiring. With dimensions of 37 x 21 x 13 mm, it can fit into a small cabinet or box for a home project. The combination of AUX input, switch knob, and cable connectors simplifies installation and later speaker replacement. This module will be appreciated by beginners in electronics as well as experienced DIYers when building simple audio setups.

Price incl. VAT €10.00