Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Step Drill Bit for Metal 6.8 mm HSS M35 with Cobalt Seven-Step Tip Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel
Step Drill Bit for Metal 6.8 mm HSS M35 with Cobalt Seven-Step Tip Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel

Step Drill Bit for Metal 6.8 mm HSS M35 with Cobalt Seven-Step Tip Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel

6.8 mm Metal Drill Bit with a seven-step tip made of cobalt HSS M35. Spiral length 70 mm and total length 102 mm for drilling into steel and stainless steel. Full description
In stock
€11.75
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Step Drill Bit for Metal 6.8 mm HSS M35 with Cobalt Seven-Step Tip Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel

The cobalt step drill bit with a diameter of 6.8 mm is a spiral drill designed for drilling into metal. It is made from high-speed steel HSS M35 with cobalt, which is suitable for drilling iron, structural steel, and stainless steel. The tip of the drill features seven small steps that smoothly transition to the full diameter. The spiral groove removes chips from the hole while drilling. The diameter of 6.8 mm is ideal where a hole just slightly smaller than seven millimetres is required.

The total length of the drill bit is 102 mm and the working part with the spiral measures 70 mm. This drill can handle sheets, strips, angles, and thicker metal profiles. The cylindrical shank fits into the chuck of a cordless drill, handheld electric drill, and bench drill. Detailed images capture the stepped tip and the shape of the spiral groove.

Compared to a standard spiral drill, this drill features seven steps at the tip with gradually increasing diameters. The narrowest step creates a small hole in the metal, and the subsequent steps gradually enlarge it. The full diameter of 6.8 mm penetrates the material only after passing through all the steps. The hole is created in a single working step, eliminating the need for pre-drilling with a smaller drill. The marks left by the individual steps in the wall of the hole are shown in the product photographs.

  • Type – spiral drill with a stepped tip
  • Diameter – 6.8 mm
  • Length of Working Part – 70 mm
  • Total Length – 102 mm
  • Material – high-speed steel HSS M35 with cobalt content
  • Tip – seven steps transitioning gradually to the full diameter
  • Shank – cylindrical
  • Usage – drilling into iron, steel, and stainless steel
  • Contents of Package – 1 piece of 6.8 mm stepped spiral drill

When working with steel and stainless steel, we recommend using cutting oil or coolant to protect the tip from overheating. Adjust the speed according to the diameter of the drill and the type of metal, and guide the drill perpendicular to the surface with even pressure. After use, clean the drill from chips and oil and store it in a way that prevents the tip from touching other metal tools. The drill is useful for assembling metal structures, holders, and brackets, for drilling holes for rivets and screws into sheets, or for repairing metal furniture and garden equipment. It is also suitable for modifying profiles and strips in a home workshop. Before starting to drill, mark the centre of the hole with a centre punch to prevent the tip from slipping on smooth metal.

The 6.8 mm drill with a stepped tip is a practical addition to the workshop and garage for metalworking. High-speed steel M35 with cobalt also drills into stainless steel. The seven steps at the tip gradually widen the hole to the full diameter. The cylindrical shank fits standard drills. The package contains one drill with a diameter of 6.8 mm.

Price incl. VAT €11.75