Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Soldering Kit for an Eight-Player Quiz Buzzer with NE555 and CD4511 ICs Seven-Segment Display and Sound Signal
Soldering Kit for an Eight-Player Quiz Buzzer with NE555 and CD4511 ICs Seven-Segment Display and Sound Signal

Soldering Kit for an Eight-Player Quiz Buzzer with NE555 and CD4511 ICs Seven-Segment Display and Sound Signal

Soldering kit for a quiz buzzer system for eight players. The display shows the number of the player who pressed their button first, and a sound signal is played. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Soldering Kit for an Eight-Player Quiz Buzzer with NE555 and CD4511 ICs Seven-Segment Display and Sound Signal

This eight-player quiz buzzer kit is a soldering kit that lets you build an electronic quiz master for general knowledge competitions and quizzes. Each of the eight players has their own button; when pressed, the seven-segment display shows the number of the fastest player. The number is processed by the CD4511 decoder, which also locks the other buttons until the quiz master resets the system. The sound signal is generated by the NE555 timer and a small sound transducer on the board. The kit is supplied as loose components for you to fit onto the printed circuit board.

The rectangular board has the CD4511 integrated circuit at the top, with the NE555 timer and a transistor next to it, and a single-digit display in the top-right corner. On the left is a green screw terminal block for connecting the power supply and a round sound transducer marked SP. The lower half of the board is taken up by the eight player buttons, S1 to S8, and a separate S9 button for resetting the system. A row of switching diodes, 1N4148, sits between the buttons and converts a button press into a number for the decoder. Next to the display are seven resistors for the individual segments; the board also has 100 µF electrolytic capacitors and 104 ceramic capacitors.

  • Type – soldering kit for a quiz buzzer system
  • Number of players – 8 buttons and a separate reset button
  • ICs – CD4511 decoder and NE555 timer
  • Display – single-digit seven-segment LED display
  • Signal – sound signal via a transducer on the board
  • Diodes – 1N4148 switching diodes
  • Power connection – screw terminal block
  • Format – loose components for soldering and assembly
  • Package contents – printed circuit board and component kit (CD4511 and NE555 ICs, seven-segment display, sound transducer, 9 buttons, 1N4148 diodes, transistor, resistors, electrolytic and ceramic capacitors, screw terminal block)

When assembling the kit, start with the diodes and resistors, then fit the ceramic capacitors, integrated circuits, transistor, buttons, electrolytic capacitors, display, sound transducer and terminal block. Follow the markings on the board to ensure the correct orientation of the diodes, electrolytic capacitors and integrated circuits. After soldering, check for any unwanted connections between adjacent pads, remove any flux residue, and only then connect the power supply, observing the correct polarity.

This quiz buzzer is a practical kit that, once completed, can be put to good use at school, in a club or at a family quiz. While soldering, you will learn how a seven-segment display decoder works and how diodes can be used to convert a button press into a number. The kit is suitable for beginners with some experience, students, teachers and electronics clubs; children can solder under adult supervision. The large number of components provides a good opportunity to practise careful, neat soldering of closely spaced pads on the board. Once assembled, the device displays the number of the player who pressed their button first.

Price incl. VAT €4.76