Home page Home page Hobbies & Garden Solar equipment Solar panels Solar Panel 6 V 220 mA 1.32 W 120 x 90 mm With Attached Two-Wire Cable Photovoltaic Cell for DIY Models and Small Electronics
Solar Panel 6 V 220 mA 1.32 W 120 x 90 mm With Attached Two-Wire Cable Photovoltaic Cell for DIY Models and Small Electronics

Solar Panel 6 V 220 mA 1.32 W 120 x 90 mm With Attached Two-Wire Cable Photovoltaic Cell for DIY Models and Small Electronics

Photovoltaic panel 120 x 90 mm with a peak power of 1.32 W and a voltage of 6 V. The cable is attached, so you can power your model or experiment immediately. Full description
In stock
€11.31
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Solar Panel 6 V 220 mA 1.32 W 120 x 90 mm With Attached Two-Wire Cable Photovoltaic Cell for DIY Models and Small Electronics

The solar panel with dimensions 120 x 90 mm offers a relatively large area of the cell in a compact format, suitable for models, educational tools, and home electronics. Under full illumination, it delivers a nominal voltage of 6 V and a current of 220 mA. It comes with an attached two-wire cable with red and black conductors, allowing you to connect it without soldering directly to the cell. The nearly square shape can be easily mounted on the roof of a model, on a box, or on a stand. It can be used for experiments at school, in clubs, or for personal projects.

The peak power of the panel is 1.32 W, making it one of the more powerful small panels suitable for powering small devices. The manufacturer specifies the parameters under simulated light intensity of 38,000 lux. Outdoors, the output varies depending on cloud cover, the angle of sunlight, and the cleanliness of the surface, so it is advisable to orient the panel directly towards the sun and avoid shading. The individual segments of the cell connected by conductive strips are clearly visible on the surface.

The panel is suitable for driving a small electric motor, powering LED lighting in a model, building a solar car, or for simple measurements in physics lessons. By connecting multiple panels in series, you can achieve a higher voltage, and by connecting them in parallel, you can achieve a higher current, allowing you to customise the power source for your specific project. Before final assembly, verify the values with a multimeter directly at the location where the panel will operate, as even partial shading can significantly reduce the output. The cable can be shortened or extended and fitted with a connector as needed.

  • Type – solar panel with attached cable
  • Nominal Voltage – 6 V
  • Nominal Current – 220 mA
  • Peak Power – 1.32 W
  • Dimensions – 120 x 90 mm
  • Measurement Conditions – simulated light intensity of 38,000 lux
  • Connection – two-wire cable with red and black conductors
  • Contents – 1 solar panel 120 x 90 mm with attached cable

When connecting, pay attention to the polarity; the red conductor is positive and the black is negative. To charge a battery, use a charging module designed for the specific type of battery. Clean the surface of the cell only with a soft dry cloth. The panel is fragile, so protect it from impacts and bending, and mount it on a flat, solid surface.

The solar panel 120 x 90 mm is a reliable foundation for small electronic projects and experiments with solar energy. The voltage of 6 V is suitable for many common connections with small motors and diodes. The compact size allows for easy installation in models and boxes. The attached cable speeds up the connection without soldering. It is a good choice for anyone looking to utilise solar energy in their own project.

Price incl. VAT €11.31