Home page Home page Hobbies & Garden Solar equipment Solar panels Solar Panel 10 V 300 mA 3 W 150 x 125 mm With Attached Cable Photovoltaic Cell with Higher Voltage for DIY and Hobby Projects
Solar Panel 10 V 300 mA 3 W 150 x 125 mm With Attached Cable Photovoltaic Cell with Higher Voltage for DIY and Hobby Projects

Solar Panel 10 V 300 mA 3 W 150 x 125 mm With Attached Cable Photovoltaic Cell with Higher Voltage for DIY and Hobby Projects

Photovoltaic panel 150 x 125 mm with a voltage of 10 V and a power output of 3 W. It has an attached cable and is well suited for DIY projects that require higher voltage. Full description
In stock
€15.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Solar Panel 10 V 300 mA 3 W 150 x 125 mm With Attached Cable Photovoltaic Cell with Higher Voltage for DIY and Hobby Projects

This solar panel measuring 150 x 125 mm differs from most mini panels due to its higher nominal voltage of 10 V. Under full illumination, it delivers a current of 300 mA, making it suitable for circuits where the lower voltage of standard small cells is insufficient. The panel comes with a factory-attached two-wire cable with red and black conductors. Therefore, soldering directly onto the cell is not necessary, and you can complete the connections quickly. It can be used in DIY projects, educational settings, and experiments with solar energy.

The peak power output of the panel is 3 W. The values are provided by the manufacturer for a simulated light intensity of 38,000 lux; therefore, the output may vary outdoors depending on cloud cover, angle of incidence, and surface cleanliness. The rectangular format provides sufficient area while remaining compact, allowing you to attach it to the lid of a box, the roof of a model, or your own mount. For the best results, orient the panel perpendicular to the sun.

The higher voltage is advantageous, for example, in circuits with a greater number of LEDs in series, in experimental circuits with a regulator, or when building a simple solar charger. If you require a higher current, you can connect multiple identical panels in parallel; conversely, a series connection will further increase the voltage. Before final installation, it is advisable to measure the actual values with a multimeter directly at the installation site, as shading, dirt, and inappropriate angles can significantly reduce output. You can shorten, extend, or terminate the cable with an appropriate connector as needed.

  • Type – rectangular solar panel with attached cable
  • Nominal Voltage – 10 V
  • Nominal Current – 300 mA
  • Peak Power – 3 W
  • Dimensions – 150 x 125 mm
  • Measurement Conditions – simulated light intensity of 38,000 lux
  • Connection – two-wire cable with red and black conductors
  • Contents – 1 solar panel 150 x 125 mm with attached cable

When connecting, observe the polarity; the positive terminal is on the red wire and the negative on the black. If you wish to charge a battery with the panel, use a charging circuit or regulator suitable for the specific type of battery and voltage. Wipe the surface only with a soft dry cloth. The photovoltaic cell is fragile, so protect it from impacts and bending. During installation, secure the panel to a firm, flat surface and route the cable so that it is not taut or pinched.

The solar panel 150 x 125 mm is suitable for DIY projects that require higher voltage and power. The nominal current of 300 mA complements the voltage of 10 V, allowing it to power more demanding small electronics. The compact rectangular shape is easy to mount on flat surfaces. The attached cable speeds up the construction of your own device. The panel is a practical choice for experiments with renewable energy at home and in school.

Price incl. VAT €15.24