Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop 1
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop 1
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop 2
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop 3
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop 4
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop 5

SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop

Calliper up to 200 mm with ABS button for relative measurement and resolution of 0.01 mm. Large LCD, zeroing at any position, mm and inches, and plastic case included. Full description
In stock
€99.52
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
SHAHE 5100 Digital Calliper 0–200 mm ABS Function Accuracy 0.03 mm Jaws 50 mm IP54 Rating Stainless Steel Case For Workshop

The SHAHE 5100 digital calliper with a range of 0 to 200 mm is a versatile measuring tool for workshops, engineering production, and DIY enthusiasts who find a 150 mm calliper insufficient and a large calliper unnecessarily long. The measured value is displayed on a large LCD screen with a resolution of 0.01 mm, so there is no need to read from a vernier scale. The main ruler, external and internal jaws, and depth measuring tongue are made of stainless steel, while the electronic body is plastic. The external jaws, measuring 50 mm, can grip wider pipes, flanges, and workpieces, while the internal jaws measure 24 mm. The total length of the calliper is 287 mm.

Compared to simpler models, the SHAHE 5100 features an ABS button, allowing you to switch between absolute and relative measurement. In relative mode, you can set zero at a chosen dimension, and the display will then show only the deviation from it, significantly speeding up the inspection of a series of parts against a template. The manufacturer specifies an accuracy of ±0.03 mm for this length, and the position of the slider is detected by a glass measuring grid. The ZERO button allows you to reset the display at any position, and the mm/in button switches the units. A metal locking screw secures the slider in place, while a metal wheel beneath the display enables fine adjustments with your thumb.

  • Model – SHAHE 5100
  • Measuring Range – 0 to 200 mm (0 to 8 inches)
  • Resolution – 0.01 mm
  • Accuracy – ±0.03 mm
  • Total Length – 287 mm
  • Jaws – external 50 mm, internal 24 mm
  • Width of Ruler – 16 mm
  • Material – hardened stainless steel, electronic body made of plastic
  • Rating – IP54
  • Display – large LCD with choice of millimetres and inches
  • Controls – OFF/ON, ZERO, mm/in and ABS buttons
  • Position Detection – glass measuring grid
  • Measuring Modes – external dimension, internal dimension, depth and step measurement
  • Equipment – data output connector, metal locking screw, metal sliding wheel, and conversion table on the back
  • Power Supply – 3 V CR1632 button battery, not included
  • Package Contents – digital calliper 0 to 200 mm, plastic case, manual, and cardboard box

The battery is inserted under the round plastic cap on the front of the body, which opens by twisting. Before each measurement, close the jaws and ensure the display shows zero. After use, turn off the calliper, wipe the measuring surfaces with a dry cloth, and store it in the plastic case, which protects the ruler, jaws, and display from impacts and dust. If you do not use the calliper for an extended period, it is advisable to remove the battery.

The SHAHE 5100 digital calliper, with a length of 200 mm, is suitable for use in engineering, metalworking, locksmithing, carpentry workshops, automotive service, furniture production, and modelling. The electronics are protected with an IP54 rating against dust and splashing water, making the calliper suitable for the typical workshop environment. The ABS function, along with zeroing, facilitates comparative measurements, and the four measuring modes cover most everyday tasks. The range up to 200 mm is suitable for shafts, bearings, pipes, profiles, and medium-sized workpieces. The sturdy case makes it a tool that can be safely transported in a tool bag.

Price incl. VAT €99.52