Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Set of 5 Diamond Drilling Core Bits 5 6 8 10 and 12 mm Hexagonal Shank 6.35 mm Black Dry Drilling Holes in Tiles and Ceramics
Set of 5 Diamond Drilling Core Bits 5 6 8 10 and 12 mm Hexagonal Shank 6.35 mm Black Dry Drilling Holes in Tiles and Ceramics

Set of 5 Diamond Drilling Core Bits 5 6 8 10 and 12 mm Hexagonal Shank 6.35 mm Black Dry Drilling Holes in Tiles and Ceramics

Five most commonly used diameters up to 12 mm in one set. The diamond tip drills dry into ceramics, marble, and granite without water and without pre-drilling a hole. Full description
In stock
€18.30
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 5 Diamond Drilling Core Bits 5 6 8 10 and 12 mm Hexagonal Shank 6.35 mm Black Dry Drilling Holes in Tiles and Ceramics

A set of five diamond core bits can handle holes for plugs and small anchors in ceramics and stone. The set includes diameters of 5 6 8 10 and 12 mm, which are the most commonly used during installation in flats. Each core bit has a hexagonal shank of 6.35 mm and fits in both cordless drills and impact wrenches without a chuck. Drilling is done dry, so you do not need to bring a container of water or a damp cloth. The diamond segment is permanently bonded to the tip and can withstand even sintered tiles where a regular masonry drill slips.

The body of the core bit is black with a light scale that allows you to see how deep you have drilled into the tile. The 5 mm and 6 mm bits have an overall length of 68 mm and a working length of 35 mm. The 8 mm, 10 mm, and 12 mm bits measure 80 mm with a working length of 42 mm. The hollow shape removes only a narrow ring of material, so the drill does not require as much power as a solid drill bit.

  • Number of pieces – 5 drilling core bits
  • Diameters – 5 6 8 10 and 12 mm
  • Type – hollow core drilling bit with bonded diamond
  • Shank – hexagonal 6.35 mm
  • Overall length – 68 mm for diameters 5 and 6 mm and 80 mm for diameters 8 to 12 mm
  • Working length – 35 mm for diameters 5 and 6 mm and 42 mm for diameters 8 to 12 mm
  • Material – steel body with diamond segment
  • Drilling method – dry without cooling with water
  • Suitable for – ceramic tiles, sintered tiles, marble, and granite
  • Colour – black
  • Package contents – 5 diamond drilling core bits with diameters of 5 6 8 10 and 12 mm

When drilling, turn off the hammer function and apply only slight pressure. Pull the core bit out every few seconds to allow dust to escape from the hole and prevent the tip from overheating. Start the hole at an angle, and once the diamond bites into the surface, straighten the tool to a vertical position. After use, tap out the drilled core from the bit and store the tool in a dry place. Allow the core bit to cool briefly between holes and keep the set out of reach of children.

The set is suitable for anchoring mirror holders, shelves, and shower rods, or for small passages for cables. It covers a range from 5 mm to 12 mm, which is sufficient for most plugs used in households. All core bits fit into the same holder, allowing you to switch between diameters quickly. Dry drilling means less mess in the finished bathroom and less cleaning after installation. Store the core bits separately from other tools to prevent the diamond tip from unnecessary abrasion.

Price incl. VAT €18.30