Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Set of 2 Tap Aerators with 20 mm Thread Water-Saving Aerators with Mesh and Filter Chrome-Plated for Basin and Sink
Set of 2 Tap Aerators with 20 mm Thread Water-Saving Aerators with Mesh and Filter Chrome-Plated for Basin and Sink

Set of 2 Tap Aerators with 20 mm Thread Water-Saving Aerators with Mesh and Filter Chrome-Plated for Basin and Sink

Two replacement aerators with an external 20 mm thread for bathroom and kitchen. The fine metal mesh aerates the water and the removable insert makes cleaning easier. Full description
In stock
€10.00
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 2 Tap Aerators with 20 mm Thread Water-Saving Aerators with Mesh and Filter Chrome-Plated for Basin and Sink

This set of two aerators with a 20 mm thread allows you to replace worn-out ends on two taps at once, for example in the bathroom and kitchen. Each aerator screws onto an outlet with an internal thread and holds firmly due to the external 20 mm thread. The casing contains a fine metal mesh and beneath it a plastic filter insert, which calms the water flow and enriches it with air. This allows the water to flow evenly, splashing less and making it more comfortable to wash hands, dishes, and fruit. You can also keep the second piece as a backup in case the first one becomes clogged over time.

Both aerators have a shiny chrome-plated surface in a silver finish, which matches standard taps. A diameter of 19.8 mm and a height of 11.6 mm ensure a discreet appearance, with the aerator protruding only slightly from the outlet. The internal insert can be easily removed from the casing, allowing you to rinse the mesh in no time. The aerated flow feels full even at a lower flow rate, helping to save water in two locations in the home simultaneously. Both pieces are identical, so you can mix and match them as needed. The mesh captures small impurities from the pipes, and the filter insert helps maintain a consistent water flow. The aerators are designed for lever and tap faucets with an internal thread of 20 mm at the basin or kitchen sink, and replacing them takes just a few minutes.

  • Type – aerator (aerator) for tap
  • Thread – external, 20 mm
  • Dimensions – diameter 19.8 mm and height 11.6 mm
  • Surface – chrome-plated, shiny silver
  • Internal Part – fine metal mesh and plastic filter insert
  • Water Flow – soft and aerated with less splashing
  • Maintenance – removable insert for easy cleaning
  • Usage – basin and kitchen taps with an internal thread of 20 mm
  • Package Contents – 2 aerators, each with a mesh and filter insert

Replacement is simple and does not require a plumber. Unscrew the original end, clean the thread on the outlet, and screw in the new aerator by hand until it is tight. When the water flow weakens over time or starts to spray sideways, it usually means that limescale or other impurities have accumulated in the mesh. You can then unscrew the aerator, remove the insert, and rinse it under running water. Wipe the chrome-plated surface with a soft cloth without harsh cleaning agents.

The set of 2 aerators with a 20 mm thread is a practical solution for households where you want to refresh multiple taps at once. Even aerated flow splashes less and is pleasant for everyday washing. Thanks to the removable insert, both aerators are easy to keep clean. You can use them in the bathroom, kitchen, at the cottage, or in the office. Before purchasing, please ensure that the tap outlet has an internal thread of 20 mm.

Price incl. VAT €10.00