Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Car Seal Small Profile D Length 2 m Rubber Strip with Adhesive Tape Black Noise, Water and Dust Protection for Bonnet and Boot
Self-Adhesive Car Seal Small Profile D Length 2 m Rubber Strip with Adhesive Tape Black Noise, Water and Dust Protection for Bonnet and Boot

Self-Adhesive Car Seal Small Profile D Length 2 m Rubber Strip with Adhesive Tape Black Noise, Water and Dust Protection for Bonnet and Boot

Rubber seal with small profile D and adhesive tape, 2 m in length. Suitable for the bonnet or boot lid, it dampens noise and prevents water and dust from entering the car. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Car Seal Small Profile D Length 2 m Rubber Strip with Adhesive Tape Black Noise, Water and Dust Protection for Bonnet and Boot

The self-adhesive seal with small profile D is a flexible rubber strip that allows you to supplement or reinforce the seal on your car without drilling or tools. The roll has a length of 2 m, which corresponds roughly to the circumference of the bonnet of a smaller vehicle or a shorter section of the boot lid. The hollow profile compresses when closed, filling the gap between the bodywork and the cover. The back side features adhesive tape with a protective film, making installation a breeze that you can complete in just a few minutes. The seal helps to reduce noise, draughts, and the ingress of water and dust.

The small profile D is primarily intended for the bonnet and boot lid, protecting both the engine and luggage compartments from moisture and dirt. The strip is made of rubber, which is soft and flexible, allowing it to conform well to the curves and corners of the bodywork. According to the manufacturer, the rubber withstands both high and low temperatures and does not tend to age quickly. The length of 2 m is ideal when you only need to seal a shorter section or replace worn seals in one area.

The seals for the bonnet and boot affect how much water, dust, and noise enter the engine and luggage compartments. Original rubber hardens, cracks, or peels over time, and the gap between the cover and the bodywork widens. A new strip with a hollow profile will fill this gap again, ensuring a better fit when closed. A shorter roll is also suitable for repairing a single damaged spot without needing to replace the seal around the entire perimeter. You can stick the strip next to the original seal or in a place where the seal is completely missing.

  • Type – self-adhesive sealing strip for cars
  • Profile – small profile D with a cavity
  • Length – 2 m in one roll
  • Material – rubber
  • Attachment – adhesive tape with protective film on the back
  • Recommended Use – bonnet and boot lid
  • Features – flexibility and resistance to high and low temperatures
  • Compatibility – universal design for most passenger cars
  • Colour – black
  • Package Contents – 1 roll of seal measuring 2 m

Before applying, thoroughly clean and degrease the area to ensure good adhesion of the tape. Gradually peel off the film while pressing the strip against the surface, preferably at room temperature. After application, allow the seal to rest for a while before you start opening and closing the bonnet or boot as usual. For maintenance, simply wipe the strip with a damp cloth.

The seal with a small profile D, measuring 2 m, is a practical solution for sealing the bonnet or boot without complicated installation. Thanks to the adhesive tape, you can apply it directly to the clean surface of the bodywork. The flexible rubber fills the gap and reduces noise as well as the ingress of water and dust. The universal design fits most passenger cars. The black colour of the strip blends discreetly with the bodywork and existing seals.

Price incl. VAT €12.62