Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Car Door Seal Profile B Length 16 m EPDM Rubber Black Noise, Water and Dust Seal for Four Car Doors
Self-Adhesive Car Door Seal Profile B Length 16 m EPDM Rubber Black Noise, Water and Dust Seal for Four Car Doors

Self-Adhesive Car Door Seal Profile B Length 16 m EPDM Rubber Black Noise, Water and Dust Seal for Four Car Doors

A 16 m roll of self-adhesive rubber seal with profile B is sufficient for all four doors. It quietens the cabin, stops drafts, and limits the ingress of water and dust. Full description
In stock
€21.79
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Car Door Seal Profile B Length 16 m EPDM Rubber Black Noise, Water and Dust Seal for Four Car Doors

The self-adhesive seal with a B-shaped profile is a simple way to seal car doors, the bonnet, or the boot. The strip is made from EPDM rubber, which remains flexible and withstands rain, sun, and temperature fluctuations. The hollow profile with two chambers compresses when the doors are closed, filling the gap between the bodywork and the doors. This results in less noise from the road, reduced wind noise, and less dust and water entering the cabin. The 16 m roll is reported by the seller to be sufficient for all four doors of a passenger car, allowing you to seal the entire cabin with one package.

On the back of the strip, there is double-sided adhesive tape protected by a red film, making installation easy without tools or drilling. The seal adheres to the door frame or the edge of the opening in the bodywork, complementing the original seal of the car. The strip can be easily trimmed with scissors or a knife to the required length. The sixteen-metre roll is intended for those who want to soundproof the entire cabin at once. Sealing applied to all four doors creates an even effect, reducing noise from the road and wind around the entire passenger space. A large roll also means less joining and a uniform appearance of the strip on all doors.

  • Type – self-adhesive seal for cars
  • Profile – shape B with two hollow chambers
  • Material – EPDM rubber
  • Length – 16 m
  • Colour – black
  • Attachment – double-sided adhesive tape with protective film
  • Use – for all four doors of a passenger car
  • Function – noise dampening and protection against water and dust
  • Contents – 1 roll of sealing strip measuring 16 m

Before applying, thoroughly clean and degrease the area where the strip will be attached and allow it to dry. Start by peeling off a piece of the protective film, position the strip on the frame, and gradually press it down while continuing to pull away the film. After applying, do not pull the strip and avoid washing the car for at least three days to allow the adhesive to set properly. During the first 24 hours, try not to open the doors unnecessarily. The doors may close stiffly for the first two to three days after installation until the seal settles. Therefore, always check that the doors are properly closed in the first few days.

The universal seal with profile B helps to enhance comfort during daily driving. The 16 m roll is sufficient for sealing all four doors and is suitable for comprehensive soundproofing of the cabin. The flexible EPDM rubber adapts to the shape of the gap when the doors are closed, limiting the ingress of noise, water, and dust into the vehicle. Installation is quick and requires no modifications to the bodywork. It is a simple accessory that improves the tightness and quietens the interior of your car.

Price incl. VAT €21.79