Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Car Door Seal Profile B Length 1 m EPDM Rubber Black Noise, Water and Dust Seal for Doors, Bonnet and Boot
Self-Adhesive Car Door Seal Profile B Length 1 m EPDM Rubber Black Noise, Water and Dust Seal for Doors, Bonnet and Boot

Self-Adhesive Car Door Seal Profile B Length 1 m EPDM Rubber Black Noise, Water and Dust Seal for Doors, Bonnet and Boot

Rubber strip with profile B and adhesive tape for shorter sections of the bodywork. It dampens road noise, stops dust and water, and softens the closing of car doors. Full description
In stock
€9.13
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Car Door Seal Profile B Length 1 m EPDM Rubber Black Noise, Water and Dust Seal for Doors, Bonnet and Boot

The self-adhesive seal with a B-shaped profile is a simple way to additionally seal the doors, bonnet or boot of a car. The strip is made from EPDM rubber, which remains flexible and withstands rain, sunlight and temperature fluctuations well. The hollow profile with two chambers compresses when the doors are closed, filling the gap between the bodywork and the doors. This results in less noise from the road, less wind noise, and reduced dust and water entering the cabin. The 1 m length is suitable for shorter sections, for example, for sealing the corner of a door frame, the edge of the boot, or areas where the original seal has lost its flexibility due to age.

On the back of the strip is double-sided adhesive tape protected by a red film, allowing for easy installation without tools or drilling. The seal adheres to the door frame or the edge of the opening in the bodywork, complementing the original seal of the car. The strip can be easily cut to the required length with scissors or a knife. A one-metre piece is useful wherever a full roll is not needed. It is ideal for filling gaps that you feel as drafts at one corner of the doors, sealing the edge of the boot lid, or testing how the profile fits at a specific spot on your vehicle before deciding on a longer package. The short strip can be easily trimmed to the required size, and the remainder can be used elsewhere.

  • Type – self-adhesive car sealing strip
  • Profile – shape B with two hollow chambers
  • Material – EPDM rubber
  • Length – 1 m
  • Colour – black
  • Attachment – double-sided adhesive tape with protective film
  • Usage – for shorter sections of the bodywork and to complement the original seal
  • Function – noise dampening and protection against water and dust
  • Contents – 1 roll of sealing strip measuring 1 m

Before applying, thoroughly clean and degrease the area where the strip will be attached, and allow it to dry. Start by peeling off a piece of the protective film, place the strip on the frame, and gradually press it down while continuing to peel off the film. After applying, do not pull on the strip, and avoid washing the car for at least three days to allow the adhesive to set properly. During the first 24 hours, try not to open the doors unnecessarily. The doors may close tightly for the first two to three days after installation until the seal settles. Therefore, always check that the doors are properly closed in the initial days.

Universal seal with profile B helps enhance comfort during daily driving. The 1 m strip is a practical solution for minor repairs and sealing specific areas on the car. The flexible EPDM rubber adapts to the shape of the gap when the doors are closed, limiting the intrusion of noise, water, and dust into the vehicle. Installation is quick and does not require any modifications to the bodywork. It is a simple addition that improves the sealing and quietens the interior of your car.

Price incl. VAT €9.13