Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Bonnet and Boot Seal Small Profile D Length 4 m Rubber with Adhesive Tape Black Seal Strip Against Water Dust and Noise
Self-Adhesive Bonnet and Boot Seal Small Profile D Length 4 m Rubber with Adhesive Tape Black Seal Strip Against Water Dust and Noise

Self-Adhesive Bonnet and Boot Seal Small Profile D Length 4 m Rubber with Adhesive Tape Black Seal Strip Against Water Dust and Noise

4 m roll of self-adhesive rubber seal with a small profile D. Seals the bonnet and boot lid, reducing noise, draughts, and the ingress of water and dust into the vehicle. Full description
In stock
€15.68
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Bonnet and Boot Seal Small Profile D Length 4 m Rubber with Adhesive Tape Black Seal Strip Against Water Dust and Noise

The self-adhesive seal strip with a small profile D is designed to seal the bonnet and boot lid of passenger cars. The roll contains 4 m of rubber seal, which is sufficient for both the bonnet and the boot of a smaller vehicle or for a longer perimeter of one cover. The hollow D-shaped profile compresses upon closure and reliably fills the gap between the cover and the bodywork. The adhesive tape on the back has a protective film, allowing you to apply the strip without drilling. This way, you better protect the interior of the car from water, dust, and noise.

The seller recommends the small profile D specifically for the bonnet and boot lid, where the seal protects the engine and luggage compartment from rain and dirt. The strip is made from soft rubber, which bends easily and conforms well to the shape of the bodywork, even in curves. According to the manufacturer, the material withstands both high and low temperatures and ages slowly. The longer roll provides a reserve for precise application around the entire perimeter.

The seal on the bonnet and boot lid wears out more quickly than one might expect, as it is exposed to heat from the engine, rain, frost, and road salt. Hardened or cracked seals then allow water and dust to pass through, and the cover may rattle while driving. The small profile D strip creates a new flexible layer onto which the cover will sit when closed. The 4 m roll allows you to seal two shorter sections or one longer perimeter at once. The strip can also be applied next to existing seals as a supplement.

  • Type – self-adhesive bonnet and boot seal
  • Profile – small profile D with a hollow core
  • Length – 4 m in one roll
  • Material – rubber
  • Fixing – adhesive tape protected by film
  • Recommended Use – bonnet and boot lid
  • Properties – soft and flexible profile resistant to heat and frost
  • Compatibility – universal for most passenger cars
  • Colour – black
  • Package Contents – 1 roll of sealing strip measuring 4 m

Before you start applying, clean and degrease the surface of the bodywork. Gradually apply the strip, peeling the film off in small sections and pressing the tape firmly along its entire length. It is best to apply in dry conditions and at room temperature. The seal can later be wiped occasionally with a damp cloth.

The 4 m roll of self-adhesive seal with a small profile D is suitable for sealing both the bonnet and the boot lid. The flexible rubber fills the gap and helps reduce noise, draughts, and the ingress of water and dust. You can manage the installation yourself thanks to the adhesive tape on the back of the strip. The universal design fits most passenger cars. The black strip is almost invisible on the vehicle.

Price incl. VAT €15.68