Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Photo, Audio-Video & TV Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables 1
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables 1
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables 2
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables 3
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables 4

Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables

Ten rubber belts with a length when folded of 90 mm in a pack for replacing the drive belt in a cassette deck, DVD player or turntable. Full description
In stock
€5.63
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rubber Drive Belts 10 pcs Length When Folded 90 mm Square Cross-section 1.2 mm Black Replacement Part for Cassette Decks DVD Players and Turntables

The pack consists of ten identical rubber belts with a length when folded of 90 mm, which replace worn, hardened or broken drive belts. The belts have a square cross-section of 1.2 mm and are intended for cassette decks and players, DVD players and mechanisms, as well as turntables with belt drives. A worn belt slips, causing the device to play slowly, the speed to fluctuate, or the mechanism not to turn at all. By replacing it with a new belt of the correct size, you restore smooth operation without the need to purchase a new mechanism. With ten pieces in the pack, you will have replacements ready for other devices as well.

The size is indicated as the length when folded. The belt is folded in half, laid flat without tension, and the distance between both folds is measured. Before selecting a size, measure the original belt from your device in the same way and also compare its thickness, as this is just as important as the length. The belts are made of elastic rubber, and therefore stretch between the motor pulley and the flywheel or platter when fitted. If the original belt is melted, sticky or broken, measure the circumference of the pulleys with a string and estimate the required length accordingly. When selecting, mainly rely on the measured length of the original belt, as even a difference of a few millimetres will affect the tension of the belt and the speed of the mechanism.

  • Type – replacement drive belt with square cross-section
  • Length When Folded – 90 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette decks and players, DVD mechanisms, turntables with belt drives
  • Contents of the Pack – 10 pcs of rubber drive belts with a length when folded of 90 mm

Before replacing, disconnect the device from the power supply and remove the mechanism cover. Carefully remove the old belt and clean the pulleys and motor shaft of any rubber residue, ideally with a cloth dampened with isopropyl alcohol. Fit the new belt without twisting and check that it sits in the grooves of the pulleys all around. After reassembly, let the device run for a while and verify that the mechanism turns smoothly. Store spare parts in a dry place, away from direct sunlight and heat sources, to help the rubber maintain its elasticity for as long as possible.

Ten black rubber belts with a length when folded of 90 mm provide a simple replacement for repairing devices with belt drives. They are suitable for cassette decks, DVD players, and turntables where the original belt has stopped reliably spinning the mechanism. All pieces in the pack are of the same size and cross-section of 1.2 mm, so please check the dimensions of the original belt before ordering. Simply fold it, measure the length when folded, and compare it with the offered size. Keep the other belts as a spare.

Price incl. VAT €5.63