Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Photo, Audio-Video & TV Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable 1
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable 1
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable 2
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable 3
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable 4

Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable

Pack of 10 rubber drive belts with a length when folded of 78 mm and a cross-section of 1.2 mm. Replacement for a stretched belt in the player, DVD or turntable. Full description
In stock
€5.63
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rubber Drive Belts 10 pcs Length When Folded 78 mm Square Cross-section 1.2 mm Rubber Black Replacement Part for Cassette Player DVD and Turntable

The pack contains ten identical rubber drive belts with a length when folded of 78 mm, which will serve as a replacement part for a stretched or hardened belt. The belts have a square cross-section of 1.2 mm and are intended for cassette players and tape recorders, DVD drives, and turntables with belt drive. An old belt will loosen over time, start to slip, and the device will then play slower, fluctuate in speed, or the mechanism may not start at all. By replacing it with a new belt of the appropriate size, you can restore reliable operation to the device without having to purchase an entirely new mechanism. Ten pieces in the pack will cover several additional repairs.

The size is given as the length when folded. The belt is folded in half, laid flat without tension, and the distance between the two bends is measured. Before selecting a size, measure the original belt from your device in the same way and also compare its thickness, as this is just as important as the length. The belts are made of elastic rubber, and therefore will stretch between the motor pulley and the flywheel or platter when fitted. If the original belt is melted, sticky, or broken, measure the circumference of the pulleys with a string and estimate the required length accordingly. When selecting, primarily follow the measured length of the original belt, as even a difference of a few millimetres will affect the tension of the belt and the speed of the mechanism.

  • Type – replacement drive belt with square cross-section
  • Length When Folded – 78 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette tape recorders and players, DVD drives, turntables with belt drive
  • Contents of the Pack – 10 pcs of rubber drive belts with a length when folded of 78 mm

Before replacing, disconnect the device from the power supply and remove the cover of the mechanism. Carefully remove the old belt and clean the pulleys and motor shaft from any rubber residue, ideally with a cloth dampened in isopropyl alcohol. Fit the new belt without twisting and check that it sits in the grooves of the pulleys all around. After assembly, let the device run for a while and verify that the mechanism rotates evenly. Store spare parts in a dry place, away from direct sunlight and heat sources, to ensure the rubber retains its elasticity for as long as possible.

Ten rubber drive belts with a length when folded of 78 mm are a suitable replacement part for devices with belt drive. They will work in cassette players, DVD drives, and turntables where the original belt has stopped reliably spinning the mechanism. All belts in the pack are the same size and have a cross-section of 1.2 mm, so please check the dimensions of the original piece before ordering. Fold it in half, measure the length when folded, and compare it with the offered size. The remaining pieces will serve as a stock.

Price incl. VAT €5.63