Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Photo, Audio-Video & TV Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable 1
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable 1
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable 2
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable 3
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable 4

Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable

Set of 10 rubber drive belts with a length when folded of 100 mm and a square cross-section of 1.2 mm for repairing the drive of a cassette tape recorder, DVD player or turntable. Full description
In stock
€6.51
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rubber Drive Belts 10 pcs Length When Folded 100 mm Square Cross-section 1.2 mm Black Replacement for Cassette Tape Recorder DVD and Turntable

The package contains ten identical rubber drive belts with a length when folded of 100 mm, which can be used to replace a stretched, hardened or broken drive belt. The belts have a square cross-section of 1.2 mm and are designed for cassette tape recorders and players, DVD players and mechanisms, as well as turntables with belt drives. A worn belt slips, causing the device to play slower, the speed to fluctuate, or the mechanism not to turn at all. By replacing it with a new belt of the correct size, you can restore the device's smooth operation without the need to purchase a new mechanism. With ten pieces in the package, you will have replacements ready for other devices as well.

The size is given as the length when folded. The belt is folded in half, laid flat without tension, and the distance between both bends is measured. Before selecting a size, measure the original belt from your device in the same way and also compare its thickness, as this is just as important as the length. The belts are made of elastic rubber, and therefore stretch between the motor pulley and the flywheel or platter when fitted. If the original belt is melted, sticky or broken, measure the circumference of the pulleys with a string and estimate the required length accordingly. When selecting, primarily follow the measured length of the original belt, as even a difference of a few millimetres can affect the tension of the belt and the speed of the mechanism.

  • Type – replacement drive belt with a square cross-section
  • Length When Folded – 100 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette tape recorders and players, DVD mechanisms, turntables with belt drives
  • Contents of Package – 10 pcs of rubber drive belts with a length when folded of 100 mm

Before replacing, disconnect the device from the power supply and remove the mechanism cover. Carefully remove the old belt and clean the pulleys and motor shaft from any rubber residue, ideally with a cloth dampened with isopropyl alcohol. Fit the new belt without twisting and check that it sits correctly in the grooves of the pulleys all around. After assembly, allow the device to run for a while and verify that the mechanism turns evenly. Store spare parts in a dry place, away from direct sunlight and heat sources, to keep the rubber as flexible as possible for as long as possible.

Ten black rubber belts with a length when folded of 100 mm provide an easy replacement for repairing devices with belt-driven mechanisms. They are suitable for cassette tape recorders, DVD players, and turntables, where the original belt has ceased to reliably turn the mechanism. All pieces in the package are of the same size and cross-section of 1.2 mm, so please check the dimensions of the original belt before ordering. Simply fold it, measure the length when folded, and compare it with the offered size. Keep the other belts as a reserve.

Price incl. VAT €6.51