Home page Home page Photo, Audio-Video & TV Rubber Bands for Cassette and Turntable 10 pcs Length when Folded 120 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD Drive
Rubber Bands for Cassette and Turntable 10 pcs Length when Folded 120 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD Drive

Rubber Bands for Cassette and Turntable 10 pcs Length when Folded 120 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD Drive

Pack of 10 rubber bands with a length when folded of 120 mm and a cross-section of 1.2 mm as a replacement for a worn-out band in a cassette player, turntable or DVD. Full description
In stock
€6.51
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rubber Bands for Cassette and Turntable 10 pcs Length when Folded 120 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD Drive

The set includes ten identical rubber bands with a length when folded of 120 mm, which can replace a stretched, hardened or broken drive band. The bands have a square cross-section of 1.2 mm and are intended for cassette players and record players, DVD players and drives, as well as turntables with belt drive. A worn band slips, causing the device to play slower, the speed to fluctuate or the drive to not spin at all. By replacing it with a new band of the correct size, you can restore the device's smooth operation without the need to purchase a new drive. With ten pieces in the pack, you will have a replacement ready for other devices as well.

The size is given as the length when folded. The band is folded in half, placed flat without tension, and the distance between the two bends is measured. Before selecting a size, measure the original band from your device in the same way and also compare its thickness, as this is just as important as the length. The bands are made of flexible rubber, and therefore they will stretch between the motor pulley and the flywheel or platter when fitted. If the original band is melted, sticky or broken, measure the circumference of the pulleys with string and estimate the required length accordingly. When selecting, primarily follow the measured length of the original band, as even a difference of a few millimetres will affect the tension of the band and the speed of the drive.

  • Type – replacement drive band with square cross-section
  • Length when Folded – 120 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Use – cassette players and record players, DVD drives, turntables with belt drive
  • Contents of the Pack – 10 pcs of rubber drive bands with a length when folded of 120 mm

Before replacing, disconnect the device from the power supply and remove the cover of the drive. Carefully remove the old band and clean the pulleys and motor shaft of any remaining rubber, ideally with a cloth dampened with isopropyl alcohol. Fit the new band without twisting and check that it sits in the grooves of the pulleys all around. After reassembly, let the device run for a while and verify that the drive spins evenly. Store spare parts in a dry place, away from direct sunlight and heat sources, to ensure the rubber retains its flexibility for as long as possible.

Ten black rubber bands with a length when folded of 120 mm provide a simple replacement for repairing devices with belt drive. They can be used in cassette players, DVD players and turntables, where the original band has stopped reliably spinning the drive. All pieces in the pack are the same size and have a cross-section of 1.2 mm, so please check the dimensions of the original band before ordering. Simply fold it, measure the length when folded and compare it with the offered size. Store the other bands as a backup.

Price incl. VAT €6.51