Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Photo, Audio-Video & TV Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables 1
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables 1
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables 2
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables 3
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables 4

Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables

Rubber drive belts with a length when folded of 59 mm in a pack of 10 pcs for repairing cassette players, DVD drives or older turntables with a belt drive. Full description
In stock
€5.63
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Rubber Belts 10 pcs Length When Folded 59 mm Square Cross-section 1.2 mm Black For Repairing Cassette Players DVD and Turntables

In the package, you will receive ten identical rubber belts with a length when folded of 59 mm, ready to replace a belt that is slipping or stretching. The belts have a square cross-section of 1.2 mm and are intended for cassette tape recorders and players, DVD drives, and turntables with belt drives. An old belt can wear out over time, harden, or start slipping, causing the device to play slower, the speed to fluctuate, or the mechanism not to turn at all. By replacing it with a new belt of the appropriate size, you can restore smooth operation without the need to purchase an entirely new mechanism. After replacement, you will have nine additional belts left in the package for your next repair.

The size is indicated as the length when folded. The belt is folded in half, laid flat without tension, and the distance from one fold to the other is measured. Before selecting a size, measure the original belt from your device in the same way and also compare its thickness, as this is just as important as the length. The belts are made from elastic rubber, so once fitted, they will stretch between the motor pulley and the flywheel or platter. If the original belt is melted, sticky, or broken, it is better to measure the circumference of the pulleys with a string and estimate the required length accordingly.

  • Type – replacement drive belt with a square cross-section
  • Length When Folded – 59 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette tape recorders and players, DVD drives, turntables with belt drives
  • Contents of Package – 10 pcs of rubber drive belts with a length when folded of 59 mm

Before replacement, disconnect the device from the power supply and remove the mechanism cover. Carefully remove the old belt and clean the pulleys and motor shaft from any remnants of the old rubber, preferably with a cloth dampened in isopropyl alcohol. Fit the new belt without twisting and ensure that it sits in the grooves of the pulleys all around. After assembly, let the device run for a while and check that the mechanism turns evenly. Store spare parts in a dry place, away from direct sunlight and heat sources, to keep the rubber as elastic as possible for as long as possible.

Ten drive belts with a length when folded of 59 mm is a simple way to repair a device with a belt drive. They are suitable for cassette tape recorders, DVD drives, and turntables where the original belt has stopped reliably transmitting motion from the motor. All pieces in the package are the same size and have a cross-section of 1.2 mm, so please verify the size of the original belt before ordering. Just fold it, measure the length when folded, and compare it with the offered size. The remaining belts can then be stored as a supply for future repairs.

Price incl. VAT €5.63