Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass 1
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass 1
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass 2
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass 3
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass 4
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass 5

Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass

The wheel with a tungsten carbide blade and ball bearing will restore the cut of your sliding cutter. Standard design for tiles, porcelain stoneware and glass. Full description
In stock
€17.42
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Cutting Wheel for Manual Tile Cutter 22 x 6 x 6 mm Tungsten Carbide with Bearing Lifespan 30,000 m for Tiles, Ceramics and Glass

The replacement cutting wheel is designed for manual sliding tile and ceramic cutters, where it replaces worn or damaged original wheels. It has dimensions of 22 x 6 x 6 mm, which means an outer diameter of 22 mm, a centre hole of 6 mm, and a width of 6 mm. The blade is made of tungsten carbide, a hard material suitable for scoring the glaze of ceramic tiles and stoneware. Inside the wheel is a ball bearing, which allows the wheel to rotate smoothly and evenly when pulled by the cutter. This is a standard design with a declared cutting lifespan of 30,000 m.

The bearing is protected by a wiper seal, which limits the ingress of dust and small debris from the cut material into the bearing. The outer part with the blade is connected to the bearing by laser welding, so the wheel forms a single solid unit. The wheel is secured in the cutter head with the included screw and nut, which serves as an axis. This means you only need to replace the wheel itself, and the cutter can continue to be used without the need to purchase a new machine. The replacement wheel is suitable as a backup in the workshop or on site, so work doesn't stop when the original wheel wears out.

  • Type – replacement cutting wheel for manual sliding tile cutter
  • Design – standard with a declared lifespan of 30,000 m
  • Outer Diameter – 22 mm
  • Hole Diameter – 6 mm
  • Width – 6 mm
  • Blade Material – tungsten carbide
  • Bearing – ball bearing with wiper seal
  • Connection – laser weld between blade and bearing
  • Suitable Materials – ceramic tiles and porcelain stoneware, common glass and microcrystalline boards
  • Package Contents – 1 cutting wheel and 1 screw with nut as an axis in a protective box

Before replacing, loosen the screw in the cutter head, remove the old wheel, and insert the new one so that it can rotate freely. Tighten the screw with the nut just enough to eliminate play in the wheel. When cutting, guide the wheel along the tile in one smooth motion with even pressure, and then break the tile using the cutter's breaker. Repeatedly running over the same groove unnecessarily strains the blade. After use, clean the wheel of dust and debris and store it outside the cutter in the provided box.

The replacement wheel with an outer diameter of 22 mm and a hole of 6 mm is a practical part for anyone working with a manual tile cutter. The tungsten carbide blade and bearing with wiper seal ensure smooth operation when scoring tiles, stoneware, and glass. The standard design with a declared lifespan of 30,000 m is suitable for home renovations as well as regular craft work. Replacing the wheel restores the cutter's clean groove without the need to purchase a new tool. The package also includes a screw with a nut, so you can install the wheel immediately.

Price incl. VAT €17.42