Home page Home page Hobbies & Garden Tools Hand Tools Replacement Blade R2 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Off Thicker Edging Strips 1.5 to 2 mm on Furniture
Replacement Blade R2 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Off Thicker Edging Strips 1.5 to 2 mm on Furniture

Replacement Blade R2 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Off Thicker Edging Strips 1.5 to 2 mm on Furniture

Replaceable metal blade R2 for edge planer for even rounding of thicker edging strips on cabinet boards, shelves, and worktops. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Blade R2 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Off Thicker Edging Strips 1.5 to 2 mm on Furniture

The replacement blade R2 is designed for use in a hand edge planer for rounding edges, which is used when working with edging strips and wooden boards. The blade measures 20 x 12 x 2 mm and has a hole in the centre for a fixing screw, allowing it to be easily fitted into the head of the planer and securely tightened. The R2 profile is designed for edging strips with a thickness of 1.5 to 2 mm and is not suitable for thin strips according to the manufacturer. It serves as a spare in the workshop when the original blade becomes dull or damaged. By replacing the blade, you can achieve a clean and even cut without the need to purchase an entirely new tool.

The blade is stamped with the size and profile designation, making it easy to distinguish from blades with different radii. It is made of metal and is secured in the planer with a screw that passes through the centre hole. Once fitted, the blade rests against the head of the planer and, when pulled along the edge, removes the overhang of the strip in a uniform arc. The R2 blade is suitable for thicker strips where a larger overhang needs to be removed and a more pronounced curve created. The resulting arc is consistent along the entire edge because the guiding surfaces of the planer keep the blade at a constant angle to the board. If there is a greater overhang of the strip, simply repeat the pull until the edge is completely smooth.

  • Type – replacement blade for hand edge planer
  • Profile – R2
  • Size – 20 x 12 x 2 mm
  • Material – metal
  • Intended Use – edging strips with a thickness of 1.5 to 2 mm, not for thin strips
  • Fixing – screw through the centre hole
  • Marking – stamped size and profile on the blade
  • Contents – 1 R2 blade

Before replacing, loosen the screw in the head of the planer, remove the old blade, and insert the new one so that it fits into the recess. Then securely tighten the screw and test the pull on a piece of waste material before starting work. After use, clean the blade of sawdust and glue residues and store it in a dry place to maintain the quality of the edge for as long as possible. It is advisable to replace a dull blade in a timely manner, as a blunt edge tears rather than cuts the strip, resulting in a rough edge.

The replacement blade R2 expands the capabilities of the hand edge planer to work with thicker edging strips on furniture boards. Thanks to the R2 profile, it creates a more pronounced rounding without sharp transitions and burrs. The metal blade is easily replaced, and the tool is then ready for use again. It is useful in the production of cabinets, shelves, and worktops, as well as in the repair of old furniture. Both DIY enthusiasts and professional carpenters who work with strips of varying thickness will appreciate it.

Price incl. VAT €12.62