Home page Home page Hobbies & Garden Tools Hand Tools Replacement Blade R1 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Edge Bands 0.8 to 2 mm and Finishing Edges of Furniture
Replacement Blade R1 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Edge Bands 0.8 to 2 mm and Finishing Edges of Furniture

Replacement Blade R1 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Edge Bands 0.8 to 2 mm and Finishing Edges of Furniture

Interchangeable Blade R1 for Hand Edge Planer for fine and smooth rounding of thin and thicker edge bands on furniture boards. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Blade R1 for Hand Edge Planer 20 x 12 x 2 mm Metal For Rounding Edge Bands 0.8 to 2 mm and Finishing Edges of Furniture

The Replacement Blade R1 is designed for use in a hand edge planer for rounding edges, which is used when working with edge bands and wooden boards. The blade has dimensions of 20 x 12 x 2 mm and features a central hole for a fixing screw, allowing it to be easily fitted into the head of the planer and securely tightened. The R1 profile is designed for edge bands with a thickness of 0.8 to 2 mm and, according to the manufacturer, creates a smooth rounding for both thin and thicker bands. It is useful as a spare in the workshop when the original blade becomes dull or damaged. By replacing the blade, you can achieve a clean and even cut without the need to purchase an entirely new tool.

The blade is stamped with the size and profile marking, which makes it easy to distinguish from blades with different radii. It is made of metal and is secured in the planer with a screw that passes through the central hole. Once fitted, the blade rests against the head of the planer and, when pulled along the edge, removes the overhang of the band in a uniform arc. The R1 blade is particularly suitable for finer work, where the edge is only slightly rounded and remains pleasant to the touch. The resulting arc is consistent along the entire length of the edge, as the guiding surfaces of the planer hold the blade at a constant angle to the board. For a more significant overhang of the band, simply repeat the pull until the edge is completely smooth.

  • Type – replacement blade for hand edge planer
  • Profile – R1
  • Dimensions – 20 x 12 x 2 mm
  • Material – metal
  • Intended Use – edge bands with a thickness of 0.8 to 2 mm
  • Fixing – screw through the central hole
  • Marking – stamped size and profile on the blade
  • Contents – 1 Blade R1

Before replacing, loosen the screw in the head of the planer, remove the old blade, and insert the new one so that it fits into the recess. Then firmly tighten the screw and before starting work, test the pull on a piece of waste material. Clean the blade of sawdust and glue residue after use and store it in a dry place to maintain the quality of the edge for as long as possible. A dull blade should be replaced in a timely manner, as a blunt edge tears the band rather than cuts, resulting in an unclean edge.

The Replacement Blade R1 is a practical addition to the hand edge planer for anyone who regularly glues edge bands or trims the edges of furniture boards. Thanks to the R1 profile, it creates fine rounding without sharp transitions and burrs. The metal blade is easy to replace, and the tool is then ready for use again. It is applicable in the production of cabinets, shelves, and worktops, as well as in the repair of old furniture. It will be appreciated by DIY enthusiasts and professional carpenters who want to have a spare blade always on hand.

Price incl. VAT €12.62