Home page Home page Home & Household Supplies Air Cleaning & Treatment Weather Stations, Thermometers & Hygrometers Rain Gauge with Tipping Bucket RS485 Modbus-RTU Resolution 0.2 mm Catchment Area 200 mm Black Rain Sensor for Weather Stations
Rain Gauge with Tipping Bucket RS485 Modbus-RTU Resolution 0.2 mm Catchment Area 200 mm Black Rain Sensor for Weather Stations

Rain Gauge with Tipping Bucket RS485 Modbus-RTU Resolution 0.2 mm Catchment Area 200 mm Black Rain Sensor for Weather Stations

Automatic rain sensor with digital output RS485 Modbus-RTU and resolution of 0.2 mm for weather stations and remote monitoring. Power supply 5 to 24 V DC. Full description
In stock
€175.94
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rain Gauge with Tipping Bucket RS485 Modbus-RTU Resolution 0.2 mm Catchment Area 200 mm Black Rain Sensor for Weather Stations

The rain gauge with a tipping bucket and digital output is used for automatic measurement of rainfall amounts at meteorological and hydrological stations, in agriculture, and in gardens. Rainwater is collected in a cylindrical receiving vessel with an opening diameter of 200 mm and flows into the tipping bucket inside the device. Each tip of the bucket corresponds to 0.2 mm of rainfall and the sensor's electronics continuously calculate the total. The measured values are transmitted via the RS485 bus, allowing you to read them from a control unit, PLC, or data logger. This eliminates the need for manual readings and recalculating pulses.

Communication occurs according to the standard Modbus-RTU protocol with a default device address of 01, a speed of 9600 Bd, 8 data bits, 1 stop bit, and no parity. The sensor contains a clock circuit and can read up to 10 registers. The default range is 0 to 100 mm per day and can be changed up to 6553.5 mm per day if needed. The resolution of 0.2 mm per tip of the bucket is sufficient for regular rainfall monitoring during irrigation and at weather stations. It is powered by direct current of 5 to 24 V DC.

The outlet features a built-in protective grid against blockage by leaves and insects, and inside the vessel, there is a filter made of stainless steel 304. The base has a spirit level and three external adjustment screws for easy leveling to a horizontal position. The tipping components have low friction, allowing for sensitive response and stable operation.

  • Type – tipping bucket rain gauge
  • Output – RS485, Modbus-RTU protocol
  • Communication – default address 01, 9600 Bd, 8 data bits, 1 stop bit, no parity
  • Resolution – 0.2 mm
  • Power Supply – 5 to 24 V DC
  • Power Consumption – maximum 0.2 W
  • Catchment Area Diameter – 200 mm
  • Rainfall Intensity Range – 0.01 to 4 mm/min
  • Accuracy – ±3 %
  • Operating Temperature – 0 to 70 °C
  • Dimensions – height 233 mm, base diameter 216 mm, leg height 34 mm
  • Colour – black
  • Package Contents – 1 tipping bucket rain gauge with RS485 output on three legs with adjustment screws

Place the device in an open area away from trees, roofs, and walls to prevent water from surrounding objects flowing into the opening, and level it according to the spirit level. Occasionally check for leaves or debris in the opening and on the filter, and after heavy rain, ensure that the outlet is not flooded.

The rain gauge with RS485 output and a resolution of 0.2 mm is suitable for automatic monitoring systems, irrigation control, and remote weather data collection. It measures with accuracy ±3 % in temperature ranges of 0 to 70 °C and can withstand humidity up to 100 % RH. The black cylindrical design on legs can be easily secured to a flat surface. The standard protocol facilitates integration into existing sensor networks.

Price incl. VAT €175.94