Home page Home page Home & Household Supplies Air Cleaning & Treatment Weather Stations, Thermometers & Hygrometers Rain Gauge with Tipping Bucket for MISOL Weather Stations Pulse Output 0.3 mm 2 m Cable with RJ11 Connector 15 x 6 x 9.4 cm Grey For the Garden
Rain Gauge with Tipping Bucket for MISOL Weather Stations Pulse Output 0.3 mm 2 m Cable with RJ11 Connector 15 x 6 x 9.4 cm Grey For the Garden

Rain Gauge with Tipping Bucket for MISOL Weather Stations Pulse Output 0.3 mm 2 m Cable with RJ11 Connector 15 x 6 x 9.4 cm Grey For the Garden

Self-emptying rain sensor with reed contact for home weather stations. Each pulse corresponds to 0.3 mm of rain and it can be either freestanding or wall-mounted. Full description
In stock
€32.27
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rain Gauge with Tipping Bucket for MISOL Weather Stations Pulse Output 0.3 mm 2 m Cable with RJ11 Connector 15 x 6 x 9.4 cm Grey For the Garden

This rain gauge is an outdoor sensor for home weather stations that measures the amount of rainfall without manual reading and without emptying water. Inside, it operates with a self-emptying tipping bucket, into which rainwater is collected by the upper funnel. Once the bucket fills up, it tips over, the water drains out from the bottom, and the opposite bucket rises back into position. Each tipping sends one pulse to the station, corresponding to 0.3 mm of rainfall. The weather station then calculates how much rain has fallen over an hour, day, or longer period based on the number of pulses.

Detection is ensured by a magnet located in the balanced triangular bucket, which activates the reed contact with each tip. This means the sensor does not require its own battery or power supply and operates purely mechanically. The rain gauge is intended as a replacement or supplementary part for MISOL weather stations, to which it connects via a 2 m cable ending with a RJ11 connector. The manufacturer does not guarantee compatibility with weather stations from other manufacturers, so please verify before purchase that your station uses the same type of connection and pulse input for rainfall. The cover with the funnel simply attaches to the base with the mechanics, making the interior easily accessible.

  • Type – rain gauge with tipping bucket
  • Measurement Principle – magnet and reed contact
  • Output – 1 pulse per 0.3 mm of rainfall
  • Cable – length 2 m
  • Connector – RJ11
  • Compatibility – MISOL weather stations
  • Dimensions – 15 x 6 x 9.4 cm
  • Mounting – freestanding or wall-mounted
  • Power Supply – does not require a battery
  • Package Contents – 1 rain gauge with cover and funnel and base with tipping bucket and permanently attached 2 m cable with RJ11 connector

For accurate measurement, place the rain gauge in an open area away from roofs, trees, and walls that could catch rain or, conversely, add water running off surrounding surfaces. The base has two mounting holes, allowing it to be securely screwed onto a horizontal surface, keeping the sensor firmly in place. Ensure it stands upright, as tilting affects the operation of the bucket. Occasionally check the funnel and remove leaves, dust, or insects that could block the opening above the bucket.

The rain gauge with tipping bucket is a practical replacement for the original rain sensor in MISOL weather stations or an addition that expands the station's capabilities to measure rainfall. It is suitable for gardeners who want to know how much water their beds and lawn have received, as well as for anyone who keeps track of the weather at home. The simple mechanical principle with pulse output without power supply requires no settings. Just place the sensor in a suitable location, connect the cable, and the station will begin recording rainfall automatically.

Price incl. VAT €32.27