Home page Home page Home & Household Supplies Air Cleaning & Treatment Weather Stations, Thermometers & Hygrometers Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.2 mm Collection Aperture 200 mm Black Rain Sensor for Weather Stations
Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.2 mm Collection Aperture 200 mm Black Rain Sensor for Weather Stations

Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.2 mm Collection Aperture 200 mm Black Rain Sensor for Weather Stations

Automatic rain sensor with a current output of 4-20 mA and a resolution of 0.2 mm for weather stations, PLCs, and remote monitoring. Power supply 12 to 24 V DC. Full description
In stock
€175.94
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.2 mm Collection Aperture 200 mm Black Rain Sensor for Weather Stations

The rain gauge with a tipping bucket and analogue output is used for automatic measurement of rainfall amounts at meteorological and hydrological stations, in agriculture, forestry, and in gardens. Rainwater is collected in a cylindrical receiving container with an opening diameter of 200 mm and flows into a tipping bucket inside the device. Each tipping of the bucket corresponds to 0.2 mm of rainfall, and the sensor's electronics continuously calculate the daily total. The result is converted into a current signal of 4-20 mA, which can be directly connected to a control unit, PLC, or data logger. This eliminates the need for manual readings and counting individual pulses.

The output is an analogue current loop 4-20 mA, which is resistant to interference and suitable for longer runs between the sensor and the control unit. The signal value corresponds to the total rainfall recorded since midnight of the current day. The default range is 0 to 100 mm per day, and other ranges can be selected as needed. With the default range, the total in millimetres is calculated as 6.25 times the current in mA minus 25, so 4 mA means zero rainfall and 20 mA means a total of 100 mm. A resolution of 0.2 mm per tipping of the bucket is sufficient for regular rainfall monitoring during irrigation and at weather stations. The sensor is powered by direct current 12 to 24 V DC and its power consumption is a maximum of 0.2 W.

The outlet has a built-in protective grid against clogging by leaves and insects, and inside the container, there is a filter made of stainless steel 304. The base has a spirit level and three external adjustment screws for easy leveling to a horizontal position. The tipping parts have low friction, allowing them to respond sensitively and operate stably. The opening has a blade with a slope of 40 to 45° and a smooth surface, on which water does not accumulate.

  • Type – tipping bucket rain gauge
  • Output – analogue current signal 4-20 mA
  • Signal Conversion – at a range of 0 to 100 mm rainfall = 6.25 x current in mA − 25
  • Resolution – 0.2 mm
  • Default Range – 0 to 100 mm per day
  • Power Supply – 12 to 24 V DC
  • Power Consumption – maximum 0.2 W
  • Diameter of Collection Aperture – 200 mm
  • Rainfall Intensity Range – 0.01 to 4 mm/min
  • Accuracy – ±3 %
  • Operating Temperature – 0 to 70 °C
  • Dimensions – height 233 mm, base diameter 216 mm, leg height 34 mm
  • Colour – black
  • Contents of Package – 1 tipping bucket rain gauge with a current output of 4-20 mA on three legs with adjustment screws

Place the device in an open area away from trees, roofs, and walls to prevent water from surrounding objects from flowing into the opening, and level it according to the spirit level. Occasionally check that there are no leaves or debris in the opening and on the filter, and after heavy rain, ensure that the outlet is not flooded. The rain gauge is factory assembled and calibrated, so it only needs to be connected after leveling.

The rain gauge with current output and a resolution of 0.2 mm is suitable for industrial control systems, PLCs, automatic irrigation, and hydrological monitoring. It measures with an accuracy of ±3 % in temperature ranges of 0 to 70 °C and can withstand humidity up to 100 % RH. The black cylindrical design on legs can be easily anchored to a flat surface. The analogue output facilitates connection to existing measuring systems without the need to program a communication protocol.

Price incl. VAT €175.94