Home page Home page Home & Household Supplies Air Cleaning & Treatment Weather Stations, Thermometers & Hygrometers Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.1 mm Catchment Diameter 200 mm Black Rain Sensor for Weather Stations
Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.1 mm Catchment Diameter 200 mm Black Rain Sensor for Weather Stations

Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.1 mm Catchment Diameter 200 mm Black Rain Sensor for Weather Stations

Automatic rain sensor with a current output of 4-20 mA and fine resolution of 0.1 mm for weather stations, PLCs, and weather data collection. Power supply 12 to 24 V DC. Full description
In stock
€178.56
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rain Gauge with Tipping Bucket Current Output 4-20 mA Resolution 0.1 mm Catchment Diameter 200 mm Black Rain Sensor for Weather Stations

The rain gauge with a tipping bucket and analogue output is designed for automatic measurement of rainfall at meteorological and hydrological stations, in agriculture, forestry, and gardens. Rainwater is collected in a cylindrical receiving container with an opening diameter of 200 mm and flows into a tipping bucket inside the device. Each tip of the bucket corresponds to 0.1 mm of rainfall, and the sensor's electronics continuously calculate the daily total. The result is converted into a current signal of 4-20 mA, which you can directly connect to a control unit, PLC, or data logger. This eliminates the need for manual readings and counting individual impulses.

The output is an analogue current loop 4-20 mA, which is resistant to interference and suitable for longer runs between the sensor and control unit. The signal value corresponds to the total rainfall recorded since midnight on the current day. The default range is 0 to 100 mm per day, and another range can be selected as needed. With the default range, the total in millimetres is calculated as 6.25 times the current in mA minus 25, so 4 mA means no rainfall and 20 mA corresponds to a total of 100 mm. The fine resolution of 0.1 mm captures even light drizzle and short showers, making it suitable for detailed recording. The sensor is powered by direct current 12 to 24 V DC and its power consumption is a maximum of 0.2 W.

The outlet features a built-in protective grid against blockage by leaves and insects, and there is a filter made of stainless steel 304 inside the container. The base has a spirit level and three external adjustment screws for easy levelling to a horizontal position. The tipping components have low friction, allowing them to respond sensitively and operate steadily. The outlet has a blade with a slope of 40 to 45° and a smooth surface where water does not accumulate.

  • Type – tipping bucket rain gauge
  • Output – analogue current signal 4-20 mA
  • Signal Conversion – for a range of 0 to 100 mm rainfall = 6.25 x current in mA − 25
  • Resolution – 0.1 mm
  • Default Range – 0 to 100 mm per day
  • Power Supply – 12 to 24 V DC
  • Power Consumption – maximum 0.2 W
  • Catching Diameter – 200 mm
  • Rainfall Intensity Range – 0.01 to 4 mm/min
  • Accuracy – ±3 %
  • Operating Temperature – 0 to 70 °C
  • Dimensions – height 233 mm, base diameter 216 mm, leg height 34 mm
  • Colour – black
  • Contents of Package – 1 tipping bucket rain gauge with a current output of 4-20 mA on three legs with adjustment screws

Position the device in an open area away from trees, roofs, and walls to prevent water from surrounding objects from flowing into the opening, and level it according to the spirit level. Occasionally check for leaves or debris in the opening and on the filter, and after heavy rain, verify that the outlet is not flooded. The rain gauge is factory assembled and calibrated, so after levelling, it only needs to be connected.

The rain gauge with current output and a resolution of 0.1 mm is suitable for industrial control systems, PLCs, automatic irrigation, and hydrological monitoring. It measures with accuracy ±3 % in temperature ranges of 0 to 70 °C and can withstand humidity up to 100 % RH. The black cylindrical design on legs can be easily anchored to a flat surface. The analogue output facilitates integration into existing measurement systems without the need to programme a communication protocol.

Price incl. VAT €178.56