Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Garage Equipment Garage Accessories Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 1
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 1
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 2
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 3
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 4
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 5
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey 6

Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey

Universal vice in dark grey can be rotated 360° and secured to the table with a screw clamp without drilling. Jaws 50 mm with an opening of up to 68 mm. Full description
In stock
€80.74
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Professional Bench Vice 360° Rotating With Anvil Jaw Width 50 mm Opening 68 mm With Clamping To Table Up To 65 mm Dark Grey

This professional bench vice with jaws of 50 mm width is designed for clamping smaller workpieces in the workshop, garage, or at home. The head of the vice is mounted on a circular base and can be rotated 360°, allowing you to position the workpiece as needed during work. The jaws with metal inserts open up to 68 mm and are controlled by a threaded spindle with a cross handle. The universal vice is attached to the edge of the table with a screw clamp, allowing you to use it without drilling into the work surface. The metal body with a small anvil at the rear has a dark grey coating with a textured surface.

  • 360° Rotation — The head rotates around the circular base. A bent lever on the side of the body above the base secures the chosen position. This allows you to rotate the workpiece without loosening the clamp or moving the vice.
  • Jaws With Inserts — The jaws, 50 mm wide, have light metal inserts that form their clamping surfaces and directly contact the clamped workpiece.
  • Jaw Opening — The movable jaw can be separated from the fixed jaw by up to 68 mm, allowing the vice to accommodate workpieces of this size.
  • Jaw Movement — The jaw slides in an open groove of the body, through which the threaded spindle controlled by the lever passes.
  • Small Anvil — Behind the fixed jaw is a raised flat area that can be used as an anvil. The anvil is part of the rotating head, so it rotates with the vice.
  • Clamping Clamp — The clamp is attached to the edge of the board and can accommodate a table or workbench up to 65 mm thick. There is no need to drill or screw into the work surface.
  • Manual Tightening — The screw of the clamp ends with a cross handle, allowing you to attach and remove the vice without tools. The clamp presses against the board from underneath.
  • Spindle Control — By turning the lever with rounded ends, the threaded spindle moves, bringing the jaws together or separating them. You can thus gradually adjust the clamping force.
  • Surface Finish — The metal body, base, and frame of the clamp have a dark grey coating with a textured surface. The spindle and levers are metal with a shiny finish.
  • Removal From The Table — After loosening the clamp, you can remove the vice from the table and store it or move it to another work table.
  • Package Contents — 1 x bench vice.

The vice with 50 mm jaws is suitable for smaller workpieces that need to be securely held during repairs, sawing, drilling, or DIY work. You can attach it to a table or workbench with a surface up to 65 mm thick without drilling, and after use, simply remove it. The rotating base allows you to turn the head 360° and secure the chosen position with the bent lever, giving you access to the workpiece from any side. A small anvil with a flat surface is also available behind the fixed jaw. This professional bench vice in dark grey is perfect for the workshop, garage, or home workbench.

Price incl. VAT €80.74