Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans PRISM 4 PRO Reverse Fan for PC Case 120 x 120 x 25 mm ARGB 5 V 3pin Mirror Effect Reverse Airflow
PRISM 4 PRO Reverse Fan for PC Case 120 x 120 x 25 mm ARGB 5 V 3pin Mirror Effect Reverse Airflow

PRISM 4 PRO Reverse Fan for PC Case 120 x 120 x 25 mm ARGB 5 V 3pin Mirror Effect Reverse Airflow

Reverse ARGB fan PRISM 4 PRO with reverse airflow, keeping the visible side in view. Mirror sides, hydraulic bearing and quiet operation. Full description
In stock
Colour:
€20.92
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
PRISM 4 PRO Reverse Fan for PC Case 120 x 120 x 25 mm ARGB 5 V 3pin Mirror Effect Reverse Airflow

The LDPCSJ PRISM 4 PRO reverse fan has an inverted airflow direction, so even when mounted at the bottom or side of the case, the visible side with the logo and lighting remains facing inwards. The frame has a standard size of 120 x 120 x 25 mm and fits into standard 120 mm fan positions. The sides of the frame are adorned with mirror strips with an infinity effect, which, along with the illuminated blades, create deep layers of light visible from all angles. The reverse design is especially appreciated in cases with panoramic glass, where every fan is visible. It is suitable for gaming computers as well as setups where you want to unify the appearance of all fans.

The manufacturer's specified speed range is 800 to 2000 RPM, allowing the fan to run quietly under low load and increase performance during gaming. The maximum airflow reaches up to 56.8 CFM, and the manufacturer states a noise level of around 20 dBA. The hydraulic bearing contributes to smooth operation, and its rated lifespan is approximately 50,000 hours. Eight damping pads on the frame reduce vibration transmission to the case. The lighting connects to an addressable 5 V 3pin connector on the motherboard and is controlled by its software, such as ASUS Aura Sync, ASRock Polychrome Sync, Gigabyte RGB Fusion or MSI Mystic Light Sync.

  • Model – LDPCSJ PRISM 4 PRO
  • Type – reverse case fan with inverted airflow direction
  • Dimensions – 120 x 120 x 25 mm
  • Lighting – ARGB with mirror infinity effect, 5 V 3pin connector
  • Power Supply – 12 V DC, 0.25 A, 3 W, 4pin connector
  • Speed – 800–2000 RPM
  • Airflow – up to 56.8 CFM
  • Noise Level – approximately 20 dBA
  • Bearing – hydraulic
  • Vibration Damping – 8 damping pads on the frame
  • Lifespan – approximately 50,000 hours
  • Package Contents – 1 PRISM 4 PRO reverse fan

Installation is the same as for a standard 120 mm fan, with the frame being screwed into the case with four screws in the corners. The power connects to the four-pin fan connector, and the lighting connects to the 5 V 3pin ARGB connector on the motherboard. Arrows on the frame indicate the airflow direction, allowing you to orient the fan to either intake or exhaust air. The blades and mirror strips can be kept clean with a soft brush or dry cloth.

The reverse PRISM 4 PRO addresses the common issue of cases with glass sides, where a standard fan would show the back with supports. Thanks to the reversed airflow, the front side with lighting remains visible even when air is drawn from the bottom or side. The fan pairs well with the classic version of the same model, creating a cohesive setup. The mirror sides with 5 V ARGB lighting add depth and an impressive look to the case. It is a practical choice for anyone building a computer with an emphasis on a clean view of the interior.

Price incl. VAT €20.92