Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Pass-Through Quick Connectors for Cables 30 pcs Lever Connector 1 to 1 for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts for Electrical
Pass-Through Quick Connectors for Cables 30 pcs Lever Connector 1 to 1 for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts for Electrical

Pass-Through Quick Connectors for Cables 30 pcs Lever Connector 1 to 1 for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts for Electrical

Set of thirty pass-through lever connectors for connecting two wires without tools. Copper contacts and a stainless steel spring hold the connection securely and it can be disconnected. Full description
In stock
€16.11
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Pass-Through Quick Connectors for Cables 30 pcs Lever Connector 1 to 1 for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts for Electrical Installation

The convenient pack of thirty pass-through quick connectors is designed for fast and clean joining of electrical wires in a straight line. Two wires are inserted into each connector from opposite sides, and each is secured by a separate lever. The connectors are rated for a current of 32 A and a voltage of 250 V, making them suitable for standard household lighting and socket circuits. You work without soldering, screws, or insulating tape. The connection is also detachable, allowing you to adjust it at any time.

The contact part is made of red copper, ensuring good conductivity and resistance to corrosion. The wire is held by a flexible stainless steel clip, which retains its elasticity even after many openings. The casing is made of flame-retardant plastic with higher heat resistance. The connector accommodates wires with a cross-section of 0.08 to 2.5 mm², suitable for both thin strands and standard installation wires.

The pass-through design of the connector is advantageous where you need to connect one wire to another without branching. This typically involves extending a short wire end in an installation box, repairing a cable interrupted during drilling, or connecting a light fixture supply. The connector works with solid and stranded wires, as the flexible clip adapts to their shape. Once the lever is lowered, the wire remains firmly clamped, and the connection will not come loose even when handling the cable.

  • Design – pass-through connector 1 to 1 with two levers
  • Rated Current – 32 A
  • Rated Voltage – 250 V
  • Suitable Wires – cross-section 0.08 to 2.5 mm²
  • Dimensions of the Connector – 31.5 x 8 x 13.5 mm
  • Contact Material – red copper
  • Clamping Spring – stainless steel
  • Casing – flame-retardant plastic
  • Colour – grey body with orange levers
  • Contents of the Package – 30 pcs pass-through lever connectors

The connection procedure is simple. Strip the end of the wire, lift the lever, insert the wire into the opening until it stops, and lower the lever. Repeat the same with the second wire on the opposite side of the connector. When changing the connection, lift the lever again and pull the wire out. Always turn off the circuit breaker for the relevant circuit before starting work and check that the entire stripped end of the wire is inserted inside the connector.

Electricians, maintenance workers, and DIY enthusiasts will appreciate the thirty pieces in the package, especially those who frequently connect wires and want to have a supply on hand. The narrow body, with a width of 8 mm, fits even in shallow installation boxes or under light fixture covers. Quick connectors make it easier to repair damaged cables, extend lighting supplies, or connect small appliances. Lever operation saves time, and the connection remains clear even after years. It is a practical consumable for workshops, households, and service cases.

Price incl. VAT €16.11