Home page Home page Hobbies & Garden Solar equipment Solar panels Mini Solar Panel 7 V 120 mA 0.84 W 110 x 110 mm With Attached Cable Square Photovoltaic Cell for DIY Projects and Models
Mini Solar Panel 7 V 120 mA 0.84 W 110 x 110 mm With Attached Cable Square Photovoltaic Cell for DIY Projects and Models

Mini Solar Panel 7 V 120 mA 0.84 W 110 x 110 mm With Attached Cable Square Photovoltaic Cell for DIY Projects and Models

Square mini panel 110 x 110 mm with a voltage of 7 V and a current of 120 mA. The attached cable makes it easy to connect to models and small DIY projects. Full description
In stock
€11.75
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini Solar Panel 7 V 120 mA 0.84 W 110 x 110 mm With Attached Cable Square Photovoltaic Cell for DIY Projects and Models

The mini solar panel in a square format 110 x 110 mm is suitable for smaller DIY projects and educational models. Under full illumination, it provides a rated voltage of 7 V and a current of 120 mA. It comes with a pre-attached two-wire cable with red and black conductors, allowing for direct connection to the cell without soldering. Its compact dimensions enable the panel to be placed on the roof of a model, on the lid of a box, or on a small stand. It can be used for experiments with solar energy at home, in school, or in an electronics club.

The peak power of the panel is 0.84 W, which is sufficient for smaller circuits with low consumption. The values provided by the manufacturer were measured under a simulated light intensity of 38,000 lux. Actual performance outdoors is affected by cloud cover, the angle of sunlight, and the cleanliness of the surface. The regular square shape settles easily and looks good even in a visible position on the model.

The panel is suitable for powering a small electric motor on a windmill model, illuminating an LED in a demonstration house, or for simple measurements in physics lessons. If higher voltage is needed, you can connect two or more panels in series, while parallel connections will increase the overall current. Before permanent installation, verify the values with a multimeter at the location where the panel will be placed, as even a small shadow or inappropriate angle can significantly affect the results. The attached cable can be shortened, extended, or terminated with a connector as needed.

  • Type – square mini solar panel with attached cable
  • Rated Voltage – 7 V
  • Rated Current – 120 mA
  • Peak Power – 0.84 W
  • Dimensions – 110 x 110 mm
  • Measurement Conditions – simulated light intensity of 38,000 lux
  • Connection – two-wire cable with red and black conductors
  • Contents – 1 solar panel 110 x 110 mm with attached cable

When connecting, pay attention to polarity; the red conductor is positive and the black is negative. If you use the panel to charge a battery, include a suitable charging module in the circuit according to the type of battery. Clean the surface of the cell only with a soft dry cloth to allow as much light as possible to reach it. The cell is fragile, so do not bend it and protect it from falling. During installation, place it on a solid flat surface and allow the cable to run freely so that no one can pull on it.

The mini solar panel 110 x 110 mm is a handy power source for models, educational tools, and small DIY projects. The voltage of 7 V along with a current of 120 mA is suitable for low-consumption circuits. The square shape is easy to mount on a flat surface. The attached cable simplifies initial connections, even for beginners. The panel is a useful aid for anyone wanting to practically explore solar energy.

Price incl. VAT €11.75