Home page Home page Photo, Audio-Video & TV Photography Accessories Tripods and holders for cameras and phones Mini Ball Head with 1/4 Inch Bottom Thread and 1/4 Inch Screw Height 43.5 mm Aluminium Black For Camera Camcorder and LED Light
Mini Ball Head with 1/4 Inch Bottom Thread and 1/4 Inch Screw Height 43.5 mm Aluminium Black For Camera Camcorder and LED Light

Mini Ball Head with 1/4 Inch Bottom Thread and 1/4 Inch Screw Height 43.5 mm Aluminium Black For Camera Camcorder and LED Light

Compact ball joint with 1/4 inch thread both at the bottom and top rotates the camera, camcorder, monitor or light on a tripod or arm to the desired angle. Full description
In stock
€10.87
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini Ball Head with 1/4 Inch Bottom Thread and 1/4 Inch Screw Height 43.5 mm Aluminium Black For Camera Camcorder and LED Light

The mini ball head with 1/4 inch thread both at the bottom and top is a universal connector between the tripod, holder or articulated arm and your camera or accessory. The bottom internal thread can be screwed onto any 1/4 inch screw, and the top screw secures the camera, camcorder, small monitor, LED light or microphone. The ball joint allows you to tilt the device, and the knurled screw on the side secures it in the set position. The body of the head is made of aluminium, making it lightweight and durable. The head is so small that you can carry it with you in your camera bag pocket.

The height of the head is only 43.5 mm and the base has a diameter of 23 mm, so it does not increase the setup on the tripod at all. The top screw protrudes from the silver pad with a diameter of 13 mm, which the device rests against after tightening. The cutout in the joint housing allows the screw to be tilted to the side, enabling the device to be rotated vertically. The side screw has coarse knurling and can be loosened or tightened by hand. The 1/4 inch thread is the most common thread for cameras, tripods, and photographic accessories, so you will find the head useful in many places.

  • Type – mini ball head with locking screw on the side
  • Bottom Thread – internal 1/4 inch
  • Top Screw – 1/4 inch
  • Height – 43.5 mm
  • Base Diameter – 23 mm
  • Screw Pad Diameter – 13 mm
  • Material – aluminium
  • Colour – black with silver screw
  • Usage – cameras, camcorders, monitors, LED lights, microphones and phone holders
  • Package Contents – 1 mini ball head with 1/4 inch thread both at the bottom and top

Screw the head onto the tripod, arm or other holder with a 1/4 inch screw and tighten it by hand. Then loosen the side screw, adjust the device to the desired angle and tighten the screw again. Due to its small size, the head is particularly suitable for lighter equipment, such as compact cameras, action cameras, smaller monitors or LED lights. A dry or slightly damp cloth is sufficient for cleaning. If you use the head outdoors, wipe off dust and sand after returning to ensure the joint continues to move smoothly. When transporting, you can leave it screwed onto a small tripod or store it separately in a case. Always check before filming that both threads and the locking screw are securely tightened.

The mini ball head with a 1/4 inch screw on top and the same internal thread below expands the possibilities of any tripod or holder. The ball joint with a side locking screw allows for quick adjustment of the tilt and direction of the mounted device. The aluminium body is lightweight and very compact. The head is suitable for photography, video recording, streaming and lighting scenes. It is a small part that is always handy in the kit of a photographer or video creator.

Price incl. VAT €10.87