Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Lever Quick Connectors for Wires 10 pcs Through Connector 1 to 1 for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper Contacts No Screws
Lever Quick Connectors for Wires 10 pcs Through Connector 1 to 1 for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper Contacts No Screws

Lever Quick Connectors for Wires 10 pcs Through Connector 1 to 1 for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper Contacts No Screws

Through lever connectors for quick connection of two wires without soldering and screwing. Copper contacts and steel spring for home electrical installation. Full description
In stock
€10.00
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Lever Quick Connectors for Wires 10 pcs Through Connector 1 to 1 for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper Contacts No Screws

The package contains ten lever quick connectors that serve to securely connect two electrical wires in a single straight line. Each connector has two opposing inputs, and each wire is secured with its own lever, allowing you to release it at any time. The connector accommodates wires with a cross section of 0.08 to 2.5 mm² and is rated for a current of 32 A. This makes it suitable for extending a short lead, repairing a broken cable, or connecting a light fixture to the wiring. The work is carried out without soldering, without insulating tape, and without a screwdriver.

Inside the connector are contacts made of red copper, which conducts electricity well and resists corrosion. The wire is pressed by a flexible stainless steel clip, which keeps the connection secure even after repeated lever openings. The body of the connector is made of plastic with increased resistance to high temperatures, which slows down combustion. Compact dimensions of 31.5 x 8 x 13.5 mm allow the connector to be easily stored in an installation box, distribution board, or behind a light fixture cover.

The connector is suitable for solid single-core wires and flexible strands, as the spring adapts to the shape of the wire. The lever stays in the closed position when folded, and the openings for the wires are clearly separated.

  • Type – through lever connector 1 to 1 for two wires
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 8 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Body – flame-retardant plastic with increased thermal resistance
  • Control – separate lever for each wire
  • Contents – 10 pcs of through lever connectors

Installation can be accomplished by even a less experienced DIY enthusiast in three steps. First, remove the insulation from the end of the wire, then lift the lever and insert the stripped end fully into the opening. Finally, fold the lever back down, securing the wire. You will secure the second wire from the opposite side in the same way. If it is necessary to disconnect the connection, simply lift the lever again and pull out the wire. Before any work on the electrical installation, always disconnect the power supply and ensure that the bare wire does not protrude outside the body of the connector.

The set of ten pieces is a practical supply for the workshop and home, whether you are repairing a lamp, extending a cable to an LED strip, or connecting wires when replacing a switch. Connectors with red copper contacts offer a reliable connection without tools and can be reused. The small dimensions and simple lever operation save time during each installation. The grey body with orange levers is easily visible even in a crowded installation box. It is a neat and clear solution for anyone who wants to quickly complete wire connections and securely close them.

Price incl. VAT €10.00