Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Lever Connectors for Wires 10 pcs 2-Pole PCT-412 250 V 32 A For Wires 0.5 to 4 mm² Transparent Body with Orange Levers For Installations
Lever Connectors for Wires 10 pcs 2-Pole PCT-412 250 V 32 A For Wires 0.5 to 4 mm² Transparent Body with Orange Levers For Installations

Lever Connectors for Wires 10 pcs 2-Pole PCT-412 250 V 32 A For Wires 0.5 to 4 mm² Transparent Body with Orange Levers For Installations

Connect two wires without screwing: lift the lever, insert the wire, and snap the lever back down. Suitable for both stranded and solid wires in home electrical installations. Full description
In stock
€10.44
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Lever Connectors for Wires 10 pcs 2-Pole PCT-412 250 V 32 A For Wires 0.5 to 4 mm² Transparent Body with Orange Levers For Installations

The PCT-412 lever connectors are a practical aid for anyone who needs to quickly and clearly connect two wires. The package contains 10 identical connectors with a transparent body and orange levers that can be operated with one finger. The connectors are designed for rated voltage 250 V and current up to 32 A, making them suitable for standard home lighting and socket circuits. There is no need for screws, twisting wires, or insulating tape. The connection is completed in a matter of seconds and can be disconnected at any time.

Each entry has its own lever, allowing you to insert and release wires individually and independently. Simply lift the lever, insert the stripped end of the wire, and snap the lever back down. Inside the connector is a spring made of stainless steel that presses the wire against the conductive strip made of tin-plated copper. The connectors are suitable for solid wires with a cross-section of 0.5 to 4 mm² as well as for flexible strands with a cross-section of 0.5 to 2.5 mm². The wire should be stripped to a length of 10 to 12 mm. The body is made of transparent polycarbonate with a flame retardant, so you can see at a glance whether the wire is fully inserted.

The two-pole connector is the most commonly used type for extending a wire or connecting two ends, for example, when connecting a light fixture to a ceiling outlet. Because each entry has its own lever, you can replace one wire without releasing the other. The connectors can also be combined in such a way that you connect a solid wire with a flexible strand in one connection, which is often a problem with twisted connections. The low height of the connector makes it easier to fit multiple connections side by side in one box.

  • Model – PCT-412
  • Number of Entries – 2
  • Rated Voltage – 250 V
  • Rated Current – 32 A
  • Solid Wire – 0.5 to 4 mm²
  • Flexible Strand – 0.5 to 2.5 mm²
  • Stripping Length – 10 to 12 mm
  • Body Material – polycarbonate with flame retardant
  • Conductive Strip – tin-plated copper
  • Spring – stainless steel
  • Dimensions – 1.35 x 1.8 x 1.03 cm
  • Package Contents – 10 pcs lever connectors for two wires

Before connecting, always disconnect the circuit from the power supply and check that it is de-energised. Only insert one wire into each entry. After snapping the lever down over the wire, gently pull on the wire to ensure it is secure. The connectors can be reused; simply lift the lever and pull out the wire. Store them in a dry place and out of reach of children.

The set of 10 PCT-412 lever connectors is a simple solution for connecting two wires in home electrical installations. With dimensions of 1.35 x 1.8 x 1.03 cm, the connector fits into smaller installation boxes. The transparent body makes it easy to check the connections, and the levers save time compared to screw terminal blocks. The connectors are useful for replacing light fixtures, switches, and sockets. They are suitable for DIY enthusiasts and electricians alike.

Price incl. VAT €10.44