Home page Home page PC & Laptop Accessories PC Components Hard Drives External Enclosure for M.2 SSD NVMe and SATA 2230 to 2280 RTL9210B Chip 10 Gb/s Up to 4 TB USB-C to USB-C Cable Aluminium Body Grey For Laptop
External Enclosure for M.2 SSD NVMe and SATA 2230 to 2280 RTL9210B Chip 10 Gb/s Up to 4 TB USB-C to USB-C Cable Aluminium Body Grey For Laptop

External Enclosure for M.2 SSD NVMe and SATA 2230 to 2280 RTL9210B Chip 10 Gb/s Up to 4 TB USB-C to USB-C Cable Aluminium Body Grey For Laptop

Universal case for M.2 NVMe and SATA drives in lengths 2230 to 2280 with tool-free installation. The short USB-C cable is suitable for both laptops and phones. Full description
In stock
€33.58
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
External Enclosure for M.2 SSD NVMe and SATA 2230 to 2280 RTL9210B Chip 10 Gb/s Up to 4 TB USB-C to USB-C Cable Aluminium Body Grey For Laptop

The external enclosure in dual protocol version accepts M.2 NVMe and SATA drives, so you don't have to worry about what type of drive you have left after upgrading your computer. Data transfer is managed by the Realtek RTL9210B controller chip, which according to the manufacturer can handle drives with a capacity of up to 4 TB. The enclosure connects via USB 3.2 Gen 2 interface with a theoretical speed of up to 10 Gb/s. It accommodates drives in lengths of 2230, 2242, 2260, and 2280. You can insert the drive without a screwdriver, and the enclosure is ready for use immediately.

The case has an aluminium alloy body that dissipates heat and protects the drive from mechanical damage. Cooling is supplemented by a thermal conductive silicone pad between the drive and the enclosure and ventilation holes at the end of the body. A flexible silicone cover is fitted over the aluminium to absorb shocks during falls and protect the surface from scratches. The internal board uses a 24-pin USB-C connector for a reliable connection to the computer.

  • Type – external enclosure for M.2 SSD drive
  • Drive Protocol – NVMe (PCIe) and SATA (NGFF)
  • Drive Key – NVMe M-Key and B+M-Key, SATA B-Key and B+M-Key
  • Drive Sizes – 2230, 2242, 2260, and 2280
  • Controller Chip – Realtek RTL9210B
  • Supported Capacity – up to 4 TB
  • Interface – USB 3.2 Gen 2, up to 10 Gb/s
  • Connector on Enclosure – USB-C
  • Supported Features – UASP, TRIM, and SMART
  • Cooling – aluminium body, thermal conductive silicone pad, and ventilation holes
  • Protection – silicone cover against shocks and scratches
  • Installation – tool-free, drive secured with a latch
  • Indication – LED indicator for operation and data transfer
  • Energy Saving – automatic sleep mode after approximately 10 minutes of inactivity
  • Cable – USB-C to USB-C, length 0.3 m
  • Colour – grey
  • Contents of Package – enclosure with aluminium body, silicone protective cover, thermal conductive silicone pad, and USB-C to USB-C cable 0.3 m

Before inserting the drive, verify its protocol and key according to the label or documentation of the drive. You will slide the board out of the enclosure, insert the drive into the connector, secure it with the latch, and place the thermal conductive pad free of protective films. Then, slide the board back into the aluminium body and connect the enclosure with the cable. The LED indicator lights up in standby mode and flashes during data transfer; after about ten minutes of inactivity, the enclosure will enter sleep mode.

The enclosure supporting both NVMe and SATA is a universal solution for anyone working with various M.2 drives. The USB-C to USB-C cable allows connection to laptops, tablets, and phones with this port. The UASP, TRIM, and SMART features contribute to stable performance when copying large files. Thanks to the silicone cover, you can carry the enclosure in your backpack without worrying about scratches. The SSD drive is not included; the enclosure is intended for your own drive.

Price incl. VAT €33.58