Home page Home page Hobbies & Garden Development boards ESP32-S3 N8R2 Development Board with 50 cm USB-C Cable WiFi and Bluetooth 5 Processor 240 MHz 8 MB Flash 2 MB PSRAM 44 Pins for IoT and Arduino
ESP32-S3 N8R2 Development Board with 50 cm USB-C Cable WiFi and Bluetooth 5 Processor 240 MHz 8 MB Flash 2 MB PSRAM 44 Pins for IoT and Arduino

ESP32-S3 N8R2 Development Board with 50 cm USB-C Cable WiFi and Bluetooth 5 Processor 240 MHz 8 MB Flash 2 MB PSRAM 44 Pins for IoT and Arduino

Starter kit: board with ESP32-S3-WROOM-1 module and cable for connecting to a computer. Programming in Arduino IDE and ESP-IDF for IoT projects. Full description
In stock
€20.04
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ESP32-S3 N8R2 Development Board with 50 cm USB-C Cable WiFi and Bluetooth 5 Processor 240 MHz 8 MB Flash 2 MB PSRAM 44 Pins for IoT and Arduino

The kit with the ESP32-S3 N8R2 development board and cable for connecting to a computer is ready to use immediately. The board is equipped with the ESP32-S3-WROOM-1 module featuring a dual-core 32-bit Xtensa LX7 processor with a clock speed of up to 240 MHz and memory 8 MB Flash and 2 MB PSRAM. Additionally, the package includes a 50 cm USB-A to USB-C cable, so you can connect the board to your computer and upload your first program right out of the box. Wireless communication is provided by 2.4 GHz WiFi according to the 802.11 b/g/n standard and Bluetooth 5 Low Energy with support for Bluetooth mesh. The kit is suitable for beginners, school clubs, and experienced IoT developers.

The board has two USB-C ports. The first is connected to the native USB interface of the ESP32-S3 chip with OTG and JTAG functionality, while the second communicates via the CH343P USB to serial converter. The board also features BOOT and RST buttons, indicators, and a programmable RGB LED WS2812 for quick functionality verification. A total of 44 pins with a pitch of 2.54 mm provide access to the chip's GPIO pins for sensors, displays, relays, and other modules.

  • Module – ESP32-S3-WROOM-1 N8R2
  • Processor – Xtensa LX7 dual-core with a frequency of up to 240 MHz
  • Memory – 8 MB Flash, 2 MB PSRAM, 512 KB SRAM, and 384 KB ROM
  • Wireless Connectivity – WiFi 2.4 GHz 802.11 b/g/n and Bluetooth 5 LE with mesh
  • Peripherals – SPI, UART, I2C, I2S, 12-bit ADC, PWM, and USB OTG
  • Number of Pins – 44 pins with a pitch of 2.54 mm
  • Ports – 2x USB-C, native USB, and CH343P serial converter
  • Components on Board – BOOT and RST buttons and RGB LED WS2812
  • Board Power Supply – 5 V from USB-C
  • Dimensions – 57.15 x 27.94 mm
  • Supported Environments – Arduino IDE, ESP-IDF, and MicroPython
  • Package Contents – 1x ESP32-S3 N8R2 development board and 1x 50 cm USB-A to USB-C cable

To program in Arduino IDE, simply install the ESP32 board support and select the ESP32 Dev Module. If you prefer Python, you can control the board via MicroPython, for example in the Thonny editor; advanced users will utilise the official ESP-IDF framework. When manually uploading firmware, hold down the BOOT button and briefly press RST.

The ESP32-S3 N8R2 development board with USB-C cable is a practical choice for anyone looking to start with wireless electronics without the need to search for additional accessories. The processor with a frequency of 240 MHz can handle data processing from sensors, lighting control, and wireless communication with other devices on the network. The compact board with pins spaced at 2.54 mm easily fits into a breadboard. Thus, the kit is suitable for teaching, prototyping, and building finished devices for smart homes.

Price incl. VAT €20.04