Home page Home page Hobbies & Garden Development boards ESP32-S3 N8R2 Development Board WiFi and Bluetooth 5 Dual-Core Processor 240 MHz 8 MB Flash 2 MB PSRAM Two USB-C Ports for IoT and Arduino
ESP32-S3 N8R2 Development Board WiFi and Bluetooth 5 Dual-Core Processor 240 MHz 8 MB Flash 2 MB PSRAM Two USB-C Ports for IoT and Arduino

ESP32-S3 N8R2 Development Board WiFi and Bluetooth 5 Dual-Core Processor 240 MHz 8 MB Flash 2 MB PSRAM Two USB-C Ports for IoT and Arduino

Programmable board with ESP32-S3-WROOM-1 module for smart home and sensors. Uploading via USB-C in Arduino IDE and MicroPython and RGB LED. Full description
In stock
€18.73
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ESP32-S3 N8R2 Development Board WiFi and Bluetooth 5 Dual-Core Processor 240 MHz 8 MB Flash 2 MB PSRAM Two USB-C Ports for IoT and Arduino

The ESP32-S3 N8R2 development board is designed for hobbyists, students, and developers who want to build smart devices with wireless connectivity. At the heart of the board is the ESP32-S3-WROOM-1 module featuring a dual-core 32-bit Xtensa LX7 processor that operates at a frequency of up to 240 MHz. The module includes 8 MB Flash and 2 MB PSRAM, enabling it to handle larger programmes and data processing. The board supports WiFi in the 2.4 GHz band according to the 802.11 b/g/n standard and Bluetooth 5 Low Energy, including Bluetooth mesh. It is suitable for smart home projects, data collection from sensors, motor control, or learning microcontroller programming.

The board features two USB-C connectors. One is directly connected to the chip's native USB interface with OTG support, while the other goes through a CH343P converter to a serial line, allowing you to upload programmes in both ways. The board includes BOOT and RST buttons, a power indicator, and an addressable RGB LED WS2812, which can be directly controlled from the programme. The pins are arranged in two rows with a pitch of 2.54 mm, and the board has a total of 44 pins for peripheral connections.

  • Module – ESP32-S3-WROOM-1 N8R2
  • Processor – dual-core 32-bit Xtensa LX7 up to 240 MHz
  • Memory – 8 MB Flash and 2 MB PSRAM, 512 KB SRAM and 384 KB ROM
  • WiFi – 2.4 GHz 802.11 b/g/n with speeds up to 150 Mb/s
  • Bluetooth – Bluetooth 5 LE and Bluetooth mesh
  • Interfaces – 4x SPI, 3x UART, 2x I2C, 2x I2S, 2x 12-bit ADC up to 20 channels and USB OTG
  • Connectors – 2x USB-C (native USB and CH343P converter)
  • Control and Indication – BOOT and RST buttons, RGB LED WS2812 and power indicator
  • Power Supply – 5 V via USB-C
  • Board Dimensions – 57.15 x 27.94 mm
  • Pin Pitch – 2.54 mm
  • Software – Arduino IDE, ESP-IDF and MicroPython
  • Package Contents – 1x ESP32-S3 N8R2 development board

Simply connect the board to your computer using a USB-C cable and select the ESP32 Dev Module in Arduino IDE, or use the ESP-IDF development framework or MicroPython with the Thonny editor. If the programme does not upload automatically, hold down the BOOT button while pressing RST. The chip also offers hardware encryption, secure boot, and a low-power coprocessor for battery-efficient operation.

The ESP32-S3 N8R2 development board provides a powerful foundation for home automation, wireless sensors, lighting control, and initial steps in programming. With WiFi and Bluetooth 5 connectivity, it communicates with phones, routers, and other devices without additional modules. The two USB-C ports facilitate programming and debugging, and the broad support for Arduino IDE and ESP-IDF provides a wealth of ready-made libraries and guides. The board with a pitch of 2.54 mm easily fits into a breadboard or your own printed circuit board.

Price incl. VAT €18.73