Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Electronic Dice for Soldering with NE555 Timer and CD4017 Counter Seven LED Lights and Power Connector Soldering Kit for Practising Soldering
Electronic Dice for Soldering with NE555 Timer and CD4017 Counter Seven LED Lights and Power Connector Soldering Kit for Practising Soldering

Electronic Dice for Soldering with NE555 Timer and CD4017 Counter Seven LED Lights and Power Connector Soldering Kit for Practising Soldering

Build a gaming dice that shows a random number on seven LEDs when the button is pressed. Soldering kit with power connector for hobbyists and DIY enthusiasts. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Electronic Dice for Soldering with NE555 Timer and CD4017 Counter Seven LED Lights and Power Connector Soldering Kit for Practising Soldering

The electronic dice for soldering is a kit that creates a digital replacement for a classic gaming dice. Simply press the button and seven red LEDs arranged like the pips on a dice will display a randomly selected number. The heart of the circuit is the NE555 timer, which generates a rapid sequence of pulses, and the CD4017 counter, which switches between states accordingly. Transistors then illuminate the correct combinations of LEDs. The kit is supplied as loose components for soldering and is suitable for anyone who wants to try working with logic circuits. The number changes very quickly with each roll, making it impossible to predict in advance which one will appear.

The printed circuit board has an elongated shape and is marked C2739-6. On the left, the LEDs are arranged in the shape of a dice face, in the middle is a row of transistors and resistors, and on the right are both integrated circuits with the button. Power is connected via a two-pin connector in the bottom right corner of the board, allowing you to easily disconnect the dice from the battery or power source. The printing on the board indicates the position and designation of all components, so you won't get lost during assembly even without experience. The resistors are neatly arranged next to the transistors, making them easy to solder and the connections easy to check. The dice can be powered, for example, from a battery connected via the connector using short wires, and the entire circuit will fit into a small box or casing.

  • Type – electronic gaming dice for soldering
  • Control Circuits – NE555 timer and CD4017 counter
  • Display – 7 red LEDs
  • Control – button
  • Power Connection – two-pin connector
  • Board Designation – C2739-6
  • Execution – loose components for soldering and assembly
  • Package Contents – printed circuit board and component set (NE555 and CD4017 circuits, 7 red LEDs, transistors, resistors, capacitors, button, two-pin connector)

Assemble the components gradually from the lowest, starting with the resistors, through the integrated circuits and button to the transistors, capacitors, connector, and LEDs. Turn the integrated circuits according to the cutout on the casing and the printing; observe the polarity for the electrolytic capacitor, and for the LEDs, the longer lead is positive. Before the first switch-on, check for any solder bridges between the pins and clean off any flux residues.

The electronic dice combines soldering practice with a useful result that you can use in board games. During construction, you will learn how the CD4017 counter progressively activates the outputs and how the timer determines the speed of changes. The kit is suitable for beginners, students of technical subjects, electronics clubs, and parents who want to spend creative time with their children. The finished dice can be built into a box and used instead of a classic dice in games with family. Thanks to the single button, the operation is simple for both young and old players, and the dice will never roll away.

Price incl. VAT €4.76