Home page Home page Hobbies & Garden Measuring Instruments DSO183 Digital Oscilloscope Soldering Kit 500 kHz Bandwidth 1.5 MSa/s 12-bit ADC USB-C 5 V Power Supply For Electronics Education
DSO183 Digital Oscilloscope Soldering Kit 500 kHz Bandwidth 1.5 MSa/s 12-bit ADC USB-C 5 V Power Supply For Electronics Education

DSO183 Digital Oscilloscope Soldering Kit 500 kHz Bandwidth 1.5 MSa/s 12-bit ADC USB-C 5 V Power Supply For Electronics Education

Single-channel oscilloscope kit for you to solder yourself, with a 12-bit converter, signal generator and waveform storage. Powered by 5 V via USB-C. Full description
In stock
€39.69
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
DSO183 Digital Oscilloscope Soldering Kit 500 kHz Bandwidth 1.5 MSa/s 12-bit ADC USB-C 5 V Power Supply For Electronics Education

The DSO183 digital oscilloscope kit is designed for anyone who wants to learn to solder while also acquiring a working measuring instrument for their home workshop. The oscilloscope has a bandwidth of 500 kHz and a sampling rate of 1.5 MSa/s, allowing it to display signal waveforms in common low-frequency circuits, power supplies and simple microcontroller circuits. The signal is processed by a 12-bit ADC and a buffer memory for 1024 waveform points. The instrument has one measurement channel with a BNC input and its own colour display. This makes the kit suitable for students, hobbyists and beginner electronics enthusiasts.

The components are supplied loose, and the through-hole parts must be soldered by hand according to the documentation. The main board already has the display and SMD components fitted, so even a less experienced hobbyist with a soldering iron can manage the soldering. The oscilloscope offers DC, AC and GND input coupling, as well as Auto, Normal and Single trigger modes. The board also features a built-in signal generator with sine, triangle and square wave outputs, plus a 1 kHz, 3.3 V test output for quickly checking that the probe is working. Measured waveforms can be saved and recalled, making it easy to compare a signal before and after modifying a circuit.

  • Model – DSO183
  • Type – digital oscilloscope soldering kit
  • Number of channels – 1
  • Bandwidth – 0 to 500 kHz
  • Sampling rate – 1.5 MSa/s
  • Converter resolution – 12 bits
  • Record length – 1024 points
  • Input coupling – DC, AC and GND
  • Trigger modes – Auto, Normal and Single
  • Functions – signal generator, waveform storage and recall
  • Power supply – 5 V DC via USB-C connector
  • Dimensions – 118 x 76 x 12 mm
  • Package contents – main board with display and fitted SMD components, BNC connector, pin header, 2 trimmer capacitors, potentiometer, 4 buttons, 3 slide switches, resistors and diode, ceramic capacitors, USB-C connector, BNC test lead with crocodile clips and USB cable

Before soldering, it is worth sorting the components by value and working from the lowest-profile parts, such as resistors and capacitors, up to the taller switches, buttons and connectors. Once assembly is complete, simply connect the oscilloscope to a charger or computer via USB-C and connect the test lead with crocodile clips to the circuit under test. Protect the finished board from moisture and dust, and place it on a non-conductive surface when working.

The DSO183 oscilloscope kit combines the fun of assembly with practical use for electronics repairs and experiments. Once soldered, it becomes a compact instrument measuring 118 x 76 x 12 mm, which fits on any workbench. It displays low-frequency signals, audio circuits and microcontroller outputs clearly on its own display, without the need for additional equipment. The built-in generator and test output make it easier to take the first steps in measurement and support teaching in school clubs. The USB-C 5 V power supply means you can use a standard phone charger or computer port.

Price incl. VAT €39.69