Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Photo, Audio-Video & TV Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable 1
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable 1
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable 2
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable 3
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable 4

Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable

Ten rubber drive belts with a length when folded of 37 mm for repairing a cassette player, DVD drive or turntable when the old belt is slipping. Full description
In stock
€5.63
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Drive Belts 10 pcs Length When Folded 37 mm Square Cross-Section 1.2 mm Rubber Black Replacement for Cassette Player DVD and Turntable

The set includes ten identical rubber drive belts with a length when folded of 37 mm, which serve as a replacement for a worn, stretched or broken belt. The belts have a square cross-section of 1.2 mm and are intended for cassette players and recorders, DVD drives and turntables with belt drive. An old belt can stretch, harden or start slipping over time, causing the device to play slower, the speed to fluctuate or the mechanism not to turn at all. By replacing it with a new belt of the correct size, you can restore the smooth operation of the device without the need to purchase an entirely new mechanism. With ten pieces in the package, you will have spare belts on hand or for other devices of the same size.

The size is given as the length when folded. The belt is folded in half, laid flat without tension, and the distance from one bend to the other is measured. Before selecting a size, measure the original belt from your device in the same manner and also compare its thickness, as this is just as important as the length. The belts are made of flexible rubber, so once fitted, they will stretch between the motor pulley and the flywheel or platter. If the original belt is melted, sticky or broken, it is better to measure the circumference of the pulleys with a string and estimate the required length based on that.

  • Type – replacement drive belt with square cross-section
  • Length When Folded – 37 mm
  • Cross-Section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette players and recorders, DVD drives, turntables with belt drive
  • Package Contents – 10 pcs rubber drive belts with a length when folded of 37 mm

Before replacing, disconnect the device from the power supply and remove the mechanism cover. Carefully remove the old belt and clean the pulleys and motor shaft of any remnants of the old rubber, preferably with a cloth dampened with isopropyl alcohol. Fit the new belt without twisting and check that it sits in the grooves of the pulleys all around. After reassembly, let the device run for a while and verify that the mechanism turns evenly. Store spare parts in a dry place, away from direct sunlight and heat sources, to keep the rubber as flexible as possible for as long as possible.

The package of ten belts with a length when folded of 37 mm is a practical replacement for repairing home electronics with belt drive. They are suitable for cassette players, DVD drives, and turntables where the original belt has stopped reliably transmitting motion from the motor. All pieces in the package are the same size and have a cross-section of 1.2 mm, so please check the size of the original belt before ordering. Simply fold it, measure the length when folded, and compare it with the offered size. You can then store the remaining belts as a supply for future repairs.

Price incl. VAT €5.63