Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Double-Sided Threaded Coupling for Tap with External Threads M22 and M22 Chrome-Plated Brass Connector for Connecting Aerator Attachments and Filters
Double-Sided Threaded Coupling for Tap with External Threads M22 and M22 Chrome-Plated Brass Connector for Connecting Aerator Attachments and Filters

Double-Sided Threaded Coupling for Tap with External Threads M22 and M22 Chrome-Plated Brass Connector for Connecting Aerator Attachments and Filters

Brass connector with external M22 thread at both ends connects a tap with internal thread at the outlet and an attachment, filter or hose with M22 thread. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double-Sided Threaded Coupling for Tap with External Threads M22 and M22 Chrome-Plated Brass Connector for Connecting Aerator Attachments and Filters

The double-sided threaded coupling for a tap is used to connect two parts that both have the same size internal thread. At each end, it has a external M22 thread with fine pitch, allowing it to be screwed into the outlet of a tap with an internal M22 thread, and on the other end, you can attach an aerator, filter, or other accessories with the same internal thread. This type of connection is useful wherever two parts with matching internal threads meet, and there is no connecting piece in between. It can be used in the kitchen, bathroom, or at the sink. You can install it yourself without special tools.

The connector is made of brass with a chrome-plated surface, which is shiny and smooth, complementing standard taps visually. Both threads are of the same size and separated by a short smooth collar, making the part low-profile and adding minimal length to the assembly. Inside the coupling, there is a hexagonal hole through which water flows. Brass has been used for plumbing connections for a long time due to its good resistance to both cold and hot water. The coupling can also serve as a replacement part for a lost or damaged connector that was part of another accessory. Its small size allows you to keep it handy in a toolbox in case it turns out that two parts with the same thread cannot be connected directly when replacing an attachment. This saves you a trip to the store and time spent searching for a suitable part.

  • Type – double-sided threaded coupling (connector) for taps
  • First thread – external M22, fine thread, diameter 22 mm
  • Second thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Usage – connecting an outlet with an internal M22 thread and accessories with an internal M22 thread
  • Suitable for – kitchen and bathroom taps, aerators, swivel attachments, and filters
  • Contents – 1 double-sided threaded coupling M22 to M22

Before purchasing, ensure that both parts you wish to connect have an internal thread with a diameter of approximately 22 mm. The easiest way to check this is with a caliper after unscrewing the original aerator. Insert seals into both connections and tighten the coupling evenly and without excessive force to avoid damaging the threads. Clean the chrome-plated surface with a soft damp cloth and a mild non-abrasive cleaner. Any limescale can be removed with a weak vinegar solution, after which rinse the part with clean water. When later replacing accessories, you can simply unscrew the coupling and use it again.

The threaded coupling with two external threads M22 is a simple part that resolves the connection of two components with the same internal thread. It is made of brass and, thanks to the chrome finish, does not appear disruptive next to the tap. You will find it useful when installing an aerator, extender, or water filter, as well as during repairs. Just measure the threads and screw in the coupling. Then connect the parts you need to both ends, and the tap will be fully functional again.

Price incl. VAT €12.18