Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 1
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 1
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 2
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 3
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 4
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 5
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 6
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite 7

Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite

Diamond crown 12 mm for larger holes in tiles, paving and natural stone. Hollow construction and hexagonal shank for any standard drill. Full description
In stock
€7.38
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Diamond Core Drill 12 mm Hexagonal Shank 6.35 mm Length 82 mm Gold Dry Drilling Holes in Tiles Marble and Granite

The diamond core drill with a diameter of 12 mm is designed for larger holes in hard materials such as ceramic tiles, paving, marble, and granite. The working part consists of a hollow crown covered with a coarse layer of diamond grains, which grinds the material around the edge of the hole. The drill has a hexagonal shank of 6.35 mm and can be clamped into the chuck of a standard drill. It is suitable for tasks such as cable passages, holes for thicker plugs, or adjustments during bathroom fixture installations. It is intended for dry drilling and, due to its diameter, complements smaller drills in your workshop.

The total length of the drill is 82 mm and the diamond working part measures 42 mm. This length is sufficient for drilling through standard tiles and thicker slabs. Because the crown only removes material around the edge, the tool does not need to grind the entire surface of the hole, leaving a core in the middle that can be easily removed after completion. The diameter of the drill is marked on the shank, making it easy to distinguish from smaller sizes.

The gold surface with a distinctive diamond structure allows you to monitor the wear of the working part. The hexagonal shank prevents slipping in the chuck and enables quick tool changes during work. The drill is useful for tilers, plumbers, and DIY enthusiasts who need to create larger holes in ceramics or stone without having to purchase an expensive core drill crown.

  • Type – diamond core drill for dry drilling
  • Drilling Diameter – 12 mm
  • Working Part Length – 42 mm
  • Total Length – 82 mm
  • Shank – hexagonal 6.35 mm
  • Construction – hollow crown with diamond grains
  • Materials – ceramic tiles, cladding, marble, and granite
  • Colour – gold
  • Package Contents – 1 diamond core drill 12 mm

When drilling into smooth glaze, start with the drill slightly tilted to prevent it from slipping on the surface, and only after creating a groove, position it vertically. Work with light pressure and allow the diamond layer to grind the material by itself. During prolonged work, take short breaks to prevent the crown from overheating. After completion, clean the drill of dust and store it in a dry place. Before drilling into a wall tile, check that there are no water pipes or electrical cables running in that area. During work, protect your eyes with safety glasses and your hands with work gloves.

The 12 mm diamond drill is a practical addition to the equipment for anyone working with tiles, paving, or natural stone. The hollow crown with diamond grains is suitable for hard and brittle materials. The working part length of 42 mm corresponds to standard tile thicknesses. The hexagonal shank of 6.35 mm allows for easy clamping into the drill. The tool is intended for dry drilling into ceramics, marble, and granite.

Price incl. VAT €7.38