Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Cobalt Step Drill Bit for Metal 6.5 mm HSS M35 Spiral with Seven Steps Tip Length 102 mm Cylindrical Shank For Steel and Stainless Steel
Cobalt Step Drill Bit for Metal 6.5 mm HSS M35 Spiral with Seven Steps Tip Length 102 mm Cylindrical Shank For Steel and Stainless Steel

Cobalt Step Drill Bit for Metal 6.5 mm HSS M35 Spiral with Seven Steps Tip Length 102 mm Cylindrical Shank For Steel and Stainless Steel

Step drill bit 6.5 mm made of HSS M35 steel with cobalt for drilling into iron, steel, and stainless steel. Length 102 mm and cylindrical shank for cordless and bench drills. Full description
In stock
€10.44
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Cobalt Step Drill Bit for Metal 6.5 mm HSS M35 Spiral with Seven Steps Tip Length 102 mm Cylindrical Shank For Steel and Stainless Steel

The step spiral drill bit for metal with a diameter of 6.5 mm is designed for drilling holes in metallic materials. It is made from high-speed steel HSS M35 with cobalt content, suitable for iron, structural steel, and stainless steel. The tip features seven small steps that gradually transition to the full diameter. The spiral flute removes chips from the hole during drilling. The diameter of 6.5 mm fills the gap between standard drill bits of 6 mm and 7 mm.

The drill measures a total of 102 mm, and the spiral working part has a length of 70 mm. This allows it to handle sheets, strips, angles, and metal profiles. The cylindrical shank fits into the chuck of cordless drills, mains drills, and bench drills. The shape of the seven-step tip and the spiral progression are captured in detailed photographs.

Unlike a conventional spiral drill bit, the tip of this model consists of seven steps with increasing diameters. The smallest step first drills a narrow hole, and each subsequent step slightly enlarges it. The full diameter of 6.5 mm is only achieved after passing through all the steps. A hole is thus created in one step without the need for pre-drilling with a thinner drill bit. The product photographs also show the traces of the steps on the wall of the hole.

  • Type – spiral drill bit with step tip
  • Diameter – 6.5 mm
  • Length of working part – 70 mm
  • Total length – 102 mm
  • Material – high-speed steel HSS M35 with cobalt content
  • Tip – seven steps gradually transitioning to full diameter
  • Shank – cylindrical
  • Usage – drilling into iron, steel, and stainless steel
  • Package contents – 1 piece of 6.5 mm step spiral drill bit

When drilling into steel and stainless steel, use cutting oil or coolant to reduce heat at the tip. Adjust the speed according to the diameter of the drill bit and the hardness of the material, and guide the drill perpendicular to the surface without excessive pressure. After use, clean the drill bit of chips and oil residues and store it in a case or separately from other tools. The diameter of 6.5 mm is useful for attaching metal brackets, hinges, and fasteners, drilling holes for screws and rivets in sheet metal parts, or for repairing frames, shelves, and garden furniture. The drill bit is also suitable for modifying strips and angles in a home workshop. Mark the centre of the hole in advance with a centre punch to prevent the drill bit from slipping at the start.

The 6.5 mm step drill bit is applicable in workshops, garages, and for DIY metalworking. Cobalt HSS M35 steel also handles drilling into stainless steel. The seven-step tip gradually enlarges the hole to the full diameter. The cylindrical shank fits into any standard drill. The package contains one drill bit with a diameter of 6.5 mm.

Price incl. VAT €10.44