Home page Home page Home & Household Supplies Office Supplies Writing Supplies Pencils & Mechanical Pencils Carpenter's Mechanical Pencil 2.8 mm with 3 Refill Cases Graphite and Wax Leads Sharpener Marking Holes in Wood
Carpenter's Mechanical Pencil 2.8 mm with 3 Refill Cases Graphite and Wax Leads Sharpener Marking Holes in Wood

Carpenter's Mechanical Pencil 2.8 mm with 3 Refill Cases Graphite and Wax Leads Sharpener Marking Holes in Wood

Carpenter's marking pencil with a long metal tip and a large supply of leads. Graphite for wood and plasterboard, wax lead for concrete, plaster, and metal. Full description
In stock
Colour:
€15.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Carpenter's Mechanical Pencil 2.8 mm with 3 Refill Cases Graphite and Wax Leads Sharpener Marking Holes in Wood

The carpenter's mechanical pencil with three refill cases is a convenient set for anyone who frequently marks on site or in the workshop and does not want to deal with running out of lead at the most inconvenient moment. The extended metal tip, measuring 43 mm, reaches into drilled holes, corners, and joints between tiles. The pencil works with thick leads of 2.8 mm diameter, which withstand greater pressure than the thin leads of standard mechanical pencils. The combination of graphite and wax leads allows you to choose the appropriate line colour according to the material. This set is suitable for carpenters, joiners, tilers, electricians, and DIY enthusiasts.

Inside the pencil cap is a built-in sharpener, allowing you to sharpen the lead anytime on-site without searching for additional tools. The lead extends by pressing a button, and you can adjust its length as needed. The metal clip keeps the pencil in your work trousers pocket, on your vest, or in your tool belt. Two cases contain a mix of graphite, red, and yellow wax leads, while the third case is filled with graphite leads for the most common marking on wood.

  • Type – carpenter's mechanical marking pencil with replacement leads
  • Lead Diameter – 2.8 mm
  • Pencil Length – 145 mm
  • Metal Tip Length – 43 mm
  • Replacement Lead Length – 120 mm
  • Lead Hardness – 2B
  • Sharpener – built into the cap
  • Usage – wood, plasterboard, paper, concrete, tiles, metal, and other surfaces
  • Package Contents – 1 mechanical pencil and 3 transparent cases with 6 leads of 2.8 mm (2 cases with a mix of 2 graphite, 2 red, and 2 yellow wax leads, and 1 case with 6 graphite leads)

Graphite leads are ideal for light materials such as wood, plywood, plasterboard, or paper. Red and yellow wax leads are used on concrete, plaster, metal, tiles, or dark wood, where graphite is harder to see. You can easily replace the lead by removing the cap, inserting a new lead, and putting the cap back on. After use, wipe the pencil clean of dust and store it with the lead retracted to prevent damage to the tip. Keep the lead cases closed to avoid breakage or spillage in your tool box.

This set with the carpenter's pencil and three lead cases will last you a long time on site, during renovations, or in the home workshop. The long metal tip allows for precise lines in deep holes, along a ruler, and in tight corners. The softer lead 2B leaves a bold and easily readable line even on rough surfaces. A total of 18 replacement leads means you will always have a replacement handy, whether marking wood or concrete. It is a practical addition to the toolkit for professionals and anyone who enjoys working with wood and wants to keep their markings precise and clean.

Price incl. VAT €15.24