Home page Home page Hobbies & Garden Development boards Bluetooth 5.0 Audio Receiver Module 5 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY
Bluetooth 5.0 Audio Receiver Module 5 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY

Bluetooth 5.0 Audio Receiver Module 5 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY

Five Bluetooth 5.0 receivers on boards for wireless music playback to speakers or amplifiers. Powered via USB-C or from a battery and jack. Full description
In stock
€16.99
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 5.0 Audio Receiver Module 5 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY

In the package, you will receive five identical wireless audio receivers. Each of them is a small electronic board that adds Bluetooth to older speakers, amplifiers, headphones, or home audio systems. The module operates with Bluetooth 5.0 technology and is powered via a USB-C connector. A phone, tablet, or laptop pairs with it just like a regular wireless speaker, and music is then played directly to the connected device. The board measures 30 x 30 mm, so it can fit into a smaller enclosure or inside a speaker. The kit is suitable for DIY enthusiasts who want to upgrade multiple pieces of older technology at once or have spare modules on hand.

The sound comes from the stereo jack 3.5 mm socket, to which you can connect headphones, active speakers, or the AUX input of an amplifier. Next to the socket, there are also solder pads on the board for the left and right channels, so the output can be wired directly to the amplifier's input. Power is supplied via a cable with a USB-C connector, which is used by most phones, chargers, and power banks today, so you do not need to look for a special adapter. For permanent installation, there is a solder pad BAT for an external lithium cell with a voltage of 3.7 V. The module operates with a power supply voltage of 3.7 to 5 V, and a blue LED indicates the connection.

  • Type – Bluetooth audio receiver and sound decoder in the form of a board
  • Bluetooth Version – 5.0
  • Supported Profiles – A2DP, AVCTP, AVDTP, AVRCP and HFP
  • Range – 15 m line of sight
  • Power Supply – USB-C 5 V or solder pad for lithium cell 3.7 V
  • Power Supply Voltage – 3.7 to 5 V
  • Audio Output – stereo jack 3.5 mm and solder pads for left and right channels
  • Signal-to-Noise Ratio – 90 dB
  • Dynamic Range – 91 dB
  • Total Harmonic Distortion THD+N – -70 dB
  • Crosstalk – -86 dB
  • Indication – blue LED in Bluetooth mode
  • Dimensions – 30 x 30 mm
  • Board Colour – black
  • Number of Pieces – 5 identical boards
  • Package Contents – 5 Bluetooth audio receiver boards of the same design without cables and casing

The module is supplied as a bare board without a casing, so protect it from moisture, dust, and short circuits during installation. It is advisable to secure the board using the mounting holes in the corners and ensure that the underside does not touch any metal parts. The antenna is printed directly on the board, so do not cover it with metal, as this may reduce the range. When soldering the power and audio wires, proceed carefully and observe the correct polarity.

A wireless receiver with a USB-C connector in a pack of five pieces is a practical solution for getting music from a mobile device to several devices that do not have Bluetooth. Thanks to its compact dimensions and power supply via USB-C or battery, it can be easily integrated into a home project. The output via the 3.5 mm jack can connect both headphones and an amplifier, and the solder pads allow for a solid connection. The black board with a range of 15 m is suitable for repairing old radios, teaching in clubs, building your own speakers, and other DIY projects.

Price incl. VAT €16.99