Home page Home page Hobbies & Garden Development boards Bluetooth 5.0 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Output 3.5 mm Power Supply 3.7 to 5 V Black
Bluetooth 5.0 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Output 3.5 mm Power Supply 3.7 to 5 V Black

Bluetooth 5.0 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Output 3.5 mm Power Supply 3.7 to 5 V Black

Pack of five Bluetooth 5.0 modules for receiving music to speakers and amplifiers. Powered via Micro USB or from a cell and output through a 3.5 mm jack. Full description
In stock
€16.99
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 5.0 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Output 3.5 mm Power Supply 3.7 to 5 V Black

The package includes five identical wireless audio receivers. Each is a small electronic board that adds Bluetooth to older speakers, amplifiers, headphones, or home audio systems. The module operates with Bluetooth 5.0 technology and is powered via a Micro USB connector. A phone, tablet, or laptop can pair with it just like a regular wireless speaker, and music is then played directly to the connected device. The board measures 30 x 30 mm, making it suitable for smaller enclosures or inside a speaker. This kit is ideal for DIY enthusiasts who want to breathe new life into multiple pieces of older technology at once or have spare modules on hand.

Sound is output from the stereo 3.5 mm jack socket, to which you can connect headphones, active speakers, or the AUX input of an amplifier. Next to the socket, there are also solder pads on the board for the left and right channels, allowing the output to be wired directly to the amplifier's input. Power is supplied via a standard cable with a Micro USB connector, which was previously used with most Android phones, so an older charger is also suitable. For permanent installation, there is a solder pad BAT for an external lithium cell with a voltage of 3.7 V. The module operates with a power supply voltage of 3.7 to 5 V, and a blue LED indicates the connection.

  • Type – Bluetooth audio receiver and sound decoder in the form of a board
  • Bluetooth Version – 5.0
  • Supported Profiles – A2DP, AVCTP, AVDTP, AVRCP, and HFP
  • Range – 15 m in direct line of sight
  • Power Supply – Micro USB 5 V or solder pad for lithium cell 3.7 V
  • Power Supply Voltage – 3.7 to 5 V
  • Audio Output – stereo 3.5 mm jack and solder pads for left and right channels
  • Signal-to-Noise Ratio – 90 dB
  • Dynamic Range – 91 dB
  • Total Harmonic Distortion THD+N – -70 dB
  • Crosstalk – -86 dB
  • Indicator – blue LED in Bluetooth mode
  • Dimensions – 30 x 30 mm
  • Board Colour – black
  • Number of Pieces – 5 identical boards
  • Package Contents – 5 Bluetooth audio receiver boards of the same design without cables and casing

The module is supplied as a bare board without a casing, so protect it from moisture, dust, and short circuits during installation. It is advisable to secure the board using the mounting holes in the corners and ensure that the underside does not touch metallic parts. The antenna is printed directly on the board, so do not cover it with metal, or the range may be reduced. When soldering power and audio wires, proceed carefully and observe the correct polarity.

A wireless receiver with a Micro USB connector in a pack of five is a practical solution for getting music from a mobile device to several devices that do not have Bluetooth. Thanks to its compact size and power supply via Micro USB or from a battery, it can be easily integrated into a home project. The output through the 3.5 mm jack can connect both headphones and an amplifier, and the solder pads allow for a solid connection. The board in black with a range of 15 m is suitable for repairing old radios, teaching in clubs, custom speakers, and other DIY projects.

Price incl. VAT €16.99